814777
27
Zoom out
Zoom in
Previous page
1/46
Next page
English 27
NOTE:
Use special caution when installing the fan to a con-
crete ceiling. In order to facilitate a secure installation,
stronger screws and dowels than those provided might
be neccessary.
4. Connect the electrical wires from the ceiling to the termi-
nal strip in the mounting bar.
Color of electrical wire Connection to
Brown or black (phase) L
Blue (neutral) N
Green yellow
(protective ground) (Ground)
5. Remove the pre-installed screws and spring washers (3)
from the motor housing (11).
6. Attach the fan blades (9) to the motor housing using the 6
screws and 6 spring washers removed earlier. Important!
Do not remove the paper padding (4) underneath.
7. Connect the cable harness from the motor housing to
the mounting bar.
NOTE: In order to facilitate installation:
You may attach one screw hole of the baldachin to the
hook on the mounting bar.
8. Attach the fan by remounting the baldachin to the
mounting bar. Make sure the pin of the baldachin is
aligned with the notch on the black cap of the spacer
tube. Tighten the four screws on the mounting bar.
9. Fit the pull chain extension (8).
10. Remove the paper cover from the spacer tube.
Operation
Fan
Use the switch (10) on the motor housing to set the rotation
direction of the fan blades. (Summer/winter operation)
CAUTION:
Only adjust the direction when the fan blades stand still.
Otherwise the motor could be damaged.
Summer operation: Set the switch to “ ” position.
Winter operation: Set the switch to “ ” position.
NOTE:
Winter operation might be without any result depending
on the size of the room.
Repeatedly pull the pull chain (5) on the motor housing to set
the speed of the fan blades.
1x = high speed
2x = medium speed
3x = low speed
4x = Fan is turned off.
Cleaning and maintenance
WARNING:
Always switch off the respective home circuit breaker before car-
rying out any cleaning or maintenance work.
Always wait until the fan blades have come to a complete stop.
Make sure no liquid enters the electrical connections, as this
could otherwise cause electrical shock or fire.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Clean the external surface of the fan with a slightly damp
cloth.
Dry the fan with a dry, soft cloth.
Noise development
The workplace-related emission value is less than 70 dB(A).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare DVL 3071 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare DVL 3071 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info