Manual Proficare BS 3110 (page 34 of 58) (English, German, Dutch, French, Italian, Polish, Spanish)

814757

Zoom out

Zoom in

1/58

PC-BS3110_IM 06.10.22

Filter Insert

CAUTION:

• Never wash the lter in the washing machine.

• Do not use a hairdryer for drying.

• Only use the appliance after the lters have been

installed correctly.

Proceed as follows to remove, clean and reinstall the lter

insert:

1. Empty the dust collector as described previously.

2. Remove the dust collector lid. Turn it anticlockwise in the

direction of .

NOTE:

The markings “ ” and “ ” are imprinted on the right

side of the dust container.

3. Remove the ne dust lter. Remove the foam insert from

the ne dust lter.

4. Remove the coarse dirt lter from the dust collector. To

do this, reach into the recesses of the lter and remove

it by pulling it upwards.

5. Use a brush to clean the lters. In case of heavy stain-

ing, clean the lters under running water.

6. Let the lters air-dry completely before retting them!

7. Wipe the dust collector with a damp cloth and then wipe

it dry.

NOTE:

If moisture gets into the rubber seal of the base plate,

carefully remove the seal and dry it as well as the

base plate. Replace the seal.

8. Put the coarse dirt lter back into the collector. Make

sure that the guides are seated in the openings.

NOTE:

The recesses are made in such a way that the

guides t in one position only. This prevents incorrect

assembly.

9. Insert the foam insert into the ne dust lter. The smooth

side must be visible.

Place the ne dust lter onto the coarse dirt lter.

10. Put the lid back on the dust collector. The guides must

t into the openings. Press it gently and turn it clockwise

until it clicks into position.

NOTE:

The recesses are made in such a way that the

guides t in one position only. This prevents incorrect

assembly.

Check the correct t of the cover. The attened side of

the handle must t over the hose connector.

11. Fit the dust collector in the appliance.

Outlet Filter

The appliance is also equipped with an outlet lter.

It is located on the back of the unit next to the parking aid.

1. Push down the lever (10) and remove the ventilation

grille.

2. Remove the lter insert and clean it. You can brush out

the lter.

3. Reinsert the lter. The guide eyes have to point up-

wards.

4. Put the ventilation grille back on the appliance. Observe

the guide lugs. The ventilation grid must engage audibly.

Cleaning

WARNING:

• Pull the mains plug out of the socket before cleaning or main-

taining the appliance.

• Under no circumstances should you immerse the appliance in

water for cleaning purposes. Otherwise this might result in an

electric shock or re.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

Clean the housing with a soft, dry cloth without additives.

Storage

• Let the appliance cool down completely.

• Wind the cable completely.

• Please insert the hook of the oor nozzle into the parking

assistant on the rear of the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proficare BS 3110 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proficare BS 3110 Manual

Product: