814752
9
Zoom out
Zoom in
Previous page
1/46
Next page
PC-AKS3034_IM_02.2023 14.02.23
9
WARNING: When Mounting the Wall Holder
Make sure beforehand that there are no hidden cables
in the wall that could damage you!
Place the wall holder so that the appliance is not
exposed to direct sunlight or other heat sources.
Notes for Use
The appliance is especially suitable for quickly vacuum-
ing small amounts of dry dirt or dust.
It is furthermore suitable for vacuuming a limited amount
of wet dirt or liquids.
Contaminated lters reduce the suction power of the
vacuum cleaner, which is why we recommend regular
cleaning of the dirt lters existing.
The appliance is operated via charged battery.
When the end of the accumulator capacity is reached,
the indicator light ashes for approx. 50 seconds during
operation. The appliance then switches off. Recharge the
accumulator.
Charging is done via the power supply unit supplied.
Direct mains operation with the power supply unit is not
possible.
On / Off Switch
I = Appliance on
O = Appliance off
Nozzle Attachments
The various nozzle attachments are easy to attach and
detach.
Mounting the Wall Holder
Inserting the Plug of the Power Supply Unit
If you want to use the wall holder also as the charging
station, attach the plug of the power supply unit rst. Refer
to the illustrations (A and B) on page 3.
1. Set the plug of the power supply unit with the attened
sides into the wall holder. (Fig. A)
2. Turn the plug of the power supply unit at the metal end
by 90 °. If necessary, use pliers to help. The plug must
be rmly seated in the holder and must not be able to be
moved. (Fig. B)
3. Fix the cable in the cable guide.
Fastening the Wall Holder
Mount the charging station near a power socket.
1. Hold the wall mount against the wall with the drill holes at
the bottom of the mount. Mark 2 drill holes.
2. Drill the holes and insert the plugs into the wall.
3. Insert the screws through the holes of the wall holder.
4. Tighten the screws with a screwdriver hand-tight into the
wall plugs.
Charging the Built-in Battery
1. Switch off the appliance.
2. Connect the power supply unit to the connection
socket (5). If you have prepared the wall holder as a
charging station, hang the appliance in it.
3. Connect the power supply unit to an approved power
outlet. Charge the appliance for 4.5 hours before using it
for the rst time.
- The indicator light lights up red during charging.
- Once the battery is fully charged, the indicator light
lights up green.
- It is normal for the appliance to heat up during
charging.
4. Stop all other charging process after a maximum of
4.5 hours or once the indicator light lights up perma-
nently green.
CAUTION:
Always disconnect the mains plug from the socket after
charging.
Using the Appliance
1. Disconnect the appliance from the power supply unit.
2. Attach a nozzle if necessary.
3. Switch on the appliance with the switch.
Vacuuming Dry Dirt
Only vacuum up dry dirt with a dry collection container
and a dry lter!
The crevice nozzles or the brush nozzle are suitable for
vacuuming dry dirt.
Picking up Wet Dirt or Liquids
1. Empty the collection container before vacuuming liquids
or wet dirt.
2. Fit the attachment for wet vacuuming (9) or one of the
two crevice nozzles (10 / 13).
3. Note the MAX marking on the collection container. The
maximum collection amount is 170 ml.
4. If you want to remove the nozzle, hold the end of the
nozzle down. In this way you avoid unintentional leakage
of the liquid.
End of Use
1. Switch off the appliance.
2. Empty the collection container as described below. Clean
the lter insert after each use to restore the appliance to
full performance the next time it is used.
3. Then recharge the accumulator of the appliance.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare AKS 3034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare AKS 3034 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info