789268

Probuilder 16937 Manual

28
Zoom out
Zoom in
Previous page
1/64
Next page
28
4. Blowing
Check that the plug is disconnected from the
mains.
Check that the tank is empty before starting
the blowing process.
Remove the dust cap (fi g. 4a) by pushing it
up and put the blow cap on (fi g. 4b).
Move the hose from the suction hose
connection (fi g. 4c) to the blow connection
(fi g. 4d).
Attach the required nozzle to the telescopic
tube.
Plug in and switch on the vacuum cleaner
(fi g. 4e).
0 = off I = on
5. Cleaning and maintenance
Check that the plug has been removed from
the mains socket.
Remove the suction hose (fi g. 5a) by gently
turning it anticlockwise.
Lift the upper section of the vacuum cleaner
off (fi g. 5b).
Remove any dust, dirt and plaster from the
tank and hose.
Check whether the hose, cord, plug and
other accessories are damaged before using
the vacuum cleaner again.
Dust fi lter – fi tting and mainte-
nance
6. Fitting the dust fi lter
Check that the plug has been removed from
the mains socket.
Lift the upper section of the vacuum cleaner
off (fi g. 6a) and place the dust fi lter in the
tank (fi g. 6b).
Fit the upper section back on the vacuum
cleaner.
7. Removing and cleaning the dust fi lter
Check that the plug has been removed from
the mains socket.
Lift the upper section of the vacuum cleaner
off and gently take the used fi lter out (fi g. 7a).
Wash the fi lter with a mild detergent and
water. Rinse well afterwards.
Allow the dust fi lter to dry completely before
using it again. Allow it to air dry. Never put it
in a tumble-dryer.
Foam fi lter – fi tting and mainte-
nance
8. Fitting the foam fi lter
Check that the plug has been removed from
the mains socket.
Remove the upper section of the vacuum
cleaner (fi g. 8a) and turn it upside down (fi g.
8b).
Allow the fi lter to gently drop down over the
fi lter basket. Make sure that the entire basket
is covered.
Fit the upper section back on the vacuum
cleaner (fi g. 8c).
9. Removing and cleaning the foam fi lter
Check that the plug has been removed from
the mains socket.
Turn the upper section of the vacuum
cleaner upside down (fi g. 9a).
Gently remove the used fi lter from the fi lter
basket.
Clean the fi lter by gently tapping any dust
out of it. Do not do this indoors.
Wash the fi lter with a mild detergent and
water. Rinse well afterwards.
Allow the foam fi lter to dry completely
before using it again. Allow it to air dry. Never
put it in a tumble-dryer.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Probuilder 16937 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Probuilder 16937 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info