807482

Pro-User SCP50 Manual

10
Zoom out
Zoom in
Previous page
1/46
Next page
10
Clock 2 Screen
Clock 2 symbol is on. This timer will begin after the clock 1 counting
has finished. In this case, after the PV input voltage has dropped to
10V (night hours), the output load will power on for 3 hours, then
switch o for 4 hours, then back on again until the PV input voltage
has risen to 12.5V at witch time the load will be cut o. This can be
set from 0 to 12 hours. Use the up/down scroll button to change the
minutes. Press enter button to set. This will then take you back to
the Ld1 screen, Press enter to move to the next screen.
LdS MODE: Load On/O based on the real time
LdS MODE: Load On/O based on the real timeLdS MODE: Load On/O based on the real time
LdS MODE: Load On/O based on the real time
This allows you to set the output load based on 24 hour time
(military time). Press the enter button and the OFF/ON will flash.
Then use the up/down scroll button to change to ON. Press enter
button to set. The clock 1 screen will then appear.
Clock 1 screen
Clock 1 symbol is on. This is a power on timer, and means the output
load will be activated at 5.00. This can be set from 0 to 24 hours.
Use the up/down scroll button to change the hours minutes. Press
enter button to set. The clock 2 screen will then appear.
Clock 2 screen
Clock 2 symbol is on. This is a power o timer, and means the output
load will will shut o at 6.00. This can be set from 0 to 24 hours. Use
the up/down scroll button to change the hours minutes. Press enter
button to set. This will then take you back to the LDs screen
• Wire the solar panels cables into the connector on the controller; make sure the solar panel
input voltage DOES NOT exceed the max limit of the controller. Wire up the battery’s positive
and negative terminals to the correct connector on the controller (marked by the battery
image). The controller will automatically detect the battery voltage scale it is connected to
and charge. The switchable output is marked with a bulb. This output is designed to run a
modest load(s), such as lights. Read the manual for the full workings of the controller as you
can adjust time as to when the output switches on and o ideal for something like security
lighting.
• Maximum 450W solar panel at 12V.
• Maximum 900W solar panel at 24V.
• Maximum 2250W solar panel at 36V.
• Maximum 3000W solar panel at 48V.
• The solar charger controller will automatically detect if you have connected up to a
12V/24V/36 or 48V battery. It will then charge appropriately.
ADDITIONAL SOLAR PANEL BATTERY CONTROLLER INFORMATION/WARNINGS
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User SCP50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User SCP50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info