722052
10
Zoom out
Zoom in
Previous page
1/44
Next page
10
WARNING! Do not open or disassemble the Inverter. Attempting to service the unit
yourself may cause the risk of electrical shock or fire. Please follow the safety
instructions when working on the device.
With the help of the red LED and the alarm beep, you may identify which type of error has occurred
LED flashes + 1x alarm beep:
battery voltage protection (battery voltage is <10.5V or >15.3V)
The battery voltage has exceeded or has fallen below the permissible range. This error occurs
-
when your battery is empty. Check the battery and recharge when required.
-
When the input voltage is too high. (possibly the voltage regulator of your car´s alternator is
defect)
LED flashes + 2x alarm beep:
temperature protection (the inverter overheated >75°C)
Please check if vent holes are obstructed or a high power was demanded for an extended period.
Let the inverter cool down before putting it in operation again
LED flashes + 3x alarm beep:
overload protection
The requested power is higher than the maximum output power of the inverter.
Alarm
Description
Possible Solution
LED flashes +
1x alarm beep
Battery Voltage Protection
The battery voltage is
lower than 10.5V
or higher than 15.3V
The battery voltage has exceeded or has fallen
below the permissible range. This error occurs
-
when your battery is empty. Check the
battery and recharge when required.
-
When the input voltage is too high. (possibly
the voltage regulator of your car´s
alternator is defect)
LED flashes +
2x alarm beep
Temperature Protection
The inverter
overheated >75°C
Please check if vent holes are obstructed or a high
power was demanded for an extended period.
Let the inverter cool down before putting it in
operation again.
LED flashes +
3x alarm beep
Overload Protection
The requested power is higher than the maximum
output power of the inverter. Check the power
consumption of connected.
If the device doesn’t work at all, an internal fuse might be blown. This happens always for a reason.
Maybe there has been a short circuit, when connecting the inverter in wrong polarity. Don´t try to replace
internal fuses yourself. The inverter has to be checked by the manufacturer or by an authorized service.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User PSI200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User PSI200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info