807468
18
Zoom out
Zoom in
Previous page
1/82
Next page
18
The inverter beeps five
times, the red fault
indicator LED Illuminates
and there is no AC output.
The inverter is
overheating. When the
internal temperature
exceeds 75°C the AC
output will shut down.
Reset the inverter by
turning it o and on again
and check to see if the
cooling fans are working
(fans automatically turn
on when the inverter is at
20% load or internal
temperatures are at
45°C). If the cooling fans
are not functioning, the
inverter will need further
assessment, please
contact Pro-User
Electronics.
If the fans are
functioning, check that all
ventilation slots and fan
openings are not
obstructed. Also ensure
that cool air is being
circulated to the inverter
and make sure ambient
temperatures do not
exceed 45°C.
The inverter beeps
eleven times, the red
fault indicator LED
illuminates and the
inverter shuts down.
The inverter has detected
a short circuit at the AC
output.
Please check that the
connected device is not
faulty and check if there
are no short circuits in the
AC circuit.
The inverter is beeping
Continuously, the red
fault indicator LED
Illuminates and there is no
AC output.
The inverter has shut
down due to overload.
Connected load has
exceeded the surge
rating of the inverter.
Disconnect the connected
load.
Reduce the connected
load.
Symptom Possible Cause Solutions
TROUBLESHOOTING
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User PSI1000TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User PSI1000TX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info