722049
12
Zoom out
Zoom in
Previous page
1/60
Next page
12
Cable-cross-section
The cable-cross-section of all used cables should be at minimum: 0.2mm
2
/A
Example: 10A current will require minimum cable-cross-section of: 10A x 0.2mm
2
/A = 2.0mm
2
The cable-cross-section is for 100% copper wire and
does not
include thickness of the cable sheath.
Device
Max. Input Current
Recommended minimum
cable cross section
PSI200
20 A
4mm² (~AWG11)
PSI400
40 A
8mm² (~AWG8)
PSI600
60 A
12mm² (~AWG6)
PSI1000
100 A
20mm² (~AWG4)
PSI1500
150 A
30mm² (~AWG2)
or 2x 16mm² (2x AWG5)
Setting-up the inverter
To set up the inverter, use the appropriate cables to
connect the positive pole (usually marked with + or coloured in red) of the battery and the positive
pole (M; coloured in red) of the inverter and
connect the negative pole (usually marked with - or coloured in black) of the battery and the negative
pole (P; coloured in black) of the inverter and
Ensure to clamp all cables securely.
The Inverter is now ready to use
: Set the position of the main switch to I or II to power on the device.
Please notice the device functions described in chapter "TECHNICAL DESCRIPTION"
NOTE: You can operate the inverter with your vehicle´s engine running or switched off. However, it is
recommended to switch off the inverter while starting the engine.
Only at models PSI1000 & PSI1500:
If you use PV solar panels to charge a connected battery
connect the positive connection (usually marked with + or colored in red) of your PV panel to the
RED CHARGING INPUT clamp of the inverter and
connect the negative connection (usually marked with + or colored in red) of your PV panel to the
BLACK CHARGING INPUT clamp of the inverter
If polarity is accidentally reversed, the inverter will indicate an error.
Bear the technical limitations of charging-input in mind:
Input voltage: 16-45V DC
Input current/ power: max. 30A PWM (max. 500W)
Output charging voltage: 7V DC 14.4V DC
Minimum recommended cable-cross-section for connecting a PV panel to the inverter is:
30A x 0.2mm
2
/A = 6.0mm
2
(~AWG9=6,632 mm
2
)
NOTE: Only charge rechargeable lead-acid batteries. Please read the safety instructions carefully
before working with batteries.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User PSI1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User PSI1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info