807473
9
Zoom out
Zoom in
Previous page
1/80
Next page
9
Charging
Your Pro-User IBC charger can easily be configured to charge many different types of batteries.The
following recommendations should, however, only be seen as guidelines. When in doubt, always consult
the battery manufacturer for further instructions.
Starting the charging process:
1. Once you have established that the battery clamps or eyelets have been correctly
connected, you can start the charging process. To do so, insert the charger plug into the
AC socket.
2. The charger will start in Standby mode, indicated by the STAND BY LED.
3. Press the mode button to select the appropriate charge mode (press and hold for three
seconds to enter an enhanced charge mode) for the voltage and chemistry of your battery.
The selected charge mode LED will illuminate.
Charging Modes.
The IBC15000B has nine (9) modes. The Lithium and Recover charge modes require the mode
button to be pressed and held for three (3) seconds to enter the enhanced mode. These “Enhanced”
modes require your full attention before selecting.
NEVER USE RECOVER MODE ON LITHIUM IRON PHOSHATE BATTERIES.
Do not operate the charger until you confirm the appropriate charge mode for your battery.
Below is a brief description:
12V NORM
For charging 12-volt Flooded, Gel, Maintenance-Free batteries.
15A
50-400Ah Batteries
12V COLD/AGM
For charging 12-volt batteries in cold temperatures below 50°F (10°C) or AGM batteries. When
selected, the LCD will illuminate.
15A
50-400Ah Batteries
24V NORM
For charging 24-volt Flooded, Gel, Maintenance-Free batteries. When selected, the LCD will
illuminate.
7.5A
25-200Ah Batteries
24V COLD/AGM
For charging 24 volt batteries in cold temperatures below 50°F (10°C) or AGM batteries. When
selected, the LCD will illuminate.
7.5A
25-200Ah Batteries
12V AGM+
For charging 12 volt advanced AGM batteries that require a higher than normal charge voltage.
When selected, the LCD will illuminate.
15A
50-400Ah Batteries
12V RECOVER
Press & Hold Mode
For recovering and repairing and storing, old, idle, damaged stratified or sulfated Flooded, Gel,
Maintenance-Free Lead Acid batteries. When selected, the LCD will illuminate.
NEVER USE RECOVER MODE ON LITHIUM BATTERIES
2.6A
50-400Ah Batteries
12.8V LITHIUM
Press & Hold Mode
For charging 12.8-volt lithium iron phosphate batteries. When selected, the LCD will illuminate.
15A
30-200Ah Batteries
13.6V Power Supply
Converts to a DC power supply for powering any 12V DC device. When selected, 13.6V LCD will
illuminate
Charging Modes
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User IBC15000B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User IBC15000B in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info