807694

Pro-User DRC4321 Manual

8
Zoom out
Zoom in
Previous page
1/49
Next page
8
Please chose (for camera 1) or (for camera 2) followed by the Power button.
Shortly after please press the rubber button on the bottom of the camera until the signal
is well received by the monitor and “OK” appears on the screen. The unit will work
properly and will automatically pair by itself in the future operation. Press the menu
button to exit the selection or it will automatically exit after 30s.
This system can support up to max 2 cameras. By using the same operation it can
connect 2 cameras at the same time. Once both 2 cameras are all paired, by selecting
the arrow button on the monitor you can choose which camera image to be shown on
the screen.
With the icon you define which camera has priority when both cameras are used at
the same time.
Picture Settings:
To make changes to the picture settings please chose the menu „Picture SPEC“ and
confirm with the Power button. Afterwards you can make changes to the Brightness,
Contrast and Colour. Please chose the menu accordingly, confirm with the Power button
and make changes with the arrows.
To save the settings and to leave the menu please press the menu button.
Orientation:
In the Menu “Picture direction” you can change the orientation of the picture. These
different views allow you to mount the camera and monitor in any position with keeping
the right picture on the monitor. Simply enter the “Picture direction” menu by choosing it
and pressing the Power button. The orientation of the picture will change every time
pressing the Power button.
To save the settings and exit the screen please press the menu button.
Product information:
In the Menu you can look up some product information by choosing the icon and
confirming by pressing the Power button.
Guideline button
This camera system has the option to show distance-
guidelines on the display. This helps you to visually see
the distance between the objects behind your car. By
pressing the guideline button, you can switch this option
on and off.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User DRC4321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User DRC4321 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 29.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info