Manual Pro-User DRC4311 (page 6 of 49) (English, German, Dutch, French)

807223

Zoom out

Zoom in

1/49

11.After determining which wire is the positive and which is the negative, turn off the

12.Splice the red wire using the supplied in-

positive (+) wire. Use a set of slip joint pliers to squeeze the TAP and insure good

connection.

13.Next splice the black wire of the camera -)

wire or ground.

14.Replace the reverse light bulb, and then re-install the light socket. Secure all the

wires with cable ties or electrical tape.

15.Re-attach the negative battery cable to the battery.

Monitor Installation

When choosing a location to mount the monitor, make sure the

monitor is in an area that will not obstruct your vision while driving.

1. Before mounting the monitor, clean the mounting surface well.

2. Position the suction mount to the smooth surface which suits

your requirement.

3. Press the suction cap against the smooth surface and press the lock down to attach

and fix the mount to the surface.

4. Snap in the monitor to the suction mount.

5. Adjust the mounting arms to suit your view angle to the monitor and tighten the

screws on the mount to fix the position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User DRC4311 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User DRC4311 Manual

Product: