807478
2
Zoom out
Zoom in
Previous page
1/13
Next page
INTRODUCTION
Thank you for purchasing the BT400 12Volt Digital Battery Tester.
Please carefully read and follow the following safety and operating instructions.
l Plug the battery tester into the 12 Volt DC accessory outlet inside the car before or after the start of the
engine in order to test the battery exactly
l The LEDs and the digital display will show battery voltage and battery condition(see chart below)
l Plug the battery tester into the 12 Volt DC accessory outlet inside the car
l Switch ON all the auxiliary electronic equipment (e.g. vipers, lights, …)
l Start the engine
l Repeat the same procedure with having switched OFF all the auxiliary electronic equipment (e.g. vipers,
lights, …)
l In both cases the symbol should not pop up in the display. If you see this symbol it indicates that the
Alternator is supplying no voltage or too low/too high voltage. Please let the alternator be checked by your
car workshop.
l Additional to this information the LEDs and the digital display will show battery voltage and battery
condition (see chart above)
l Connect the BT400 (5V input) with the USB cable of your mobile electronic equipment
l Your mobile electronic equipment will be charged upon the following status from your USB port
- USB icon display: indicates USB is workable
- USB icon OFF: indicates input voltage > / = 15.2V OR < 10.5V, it’s in OFF status
- USB icon flash: indicates overload or short circuit, it’s in OFF status
INSTRUCTIONS TESTING BATTERY
LED LAMP
DIGITAL
READOUT
INDICATION
CONDITION
ON
YELLOW
X
Below 7.0V
POOR
Examine battery and electrical system
YELLOW
X
Display Real
Voltage
LOW VOLTAGE
7-11.8V,To check if need to charge
battery
GREEN
X
Display Real
Voltage
NORMAL
11.8-14.5V, Normal
RED
X
Display Real
Voltage
HIGH VOLTAGE
14.5-15.5V, Battery Fully Charged
RED
X
Above 15.5V
HIGH INPUT
VOLTAGE
Examine alternator and battery
INSTRUCTIONS TESTING ALTERNATOR
INSTRUCTIONS CHARGING MOBILE ELECTRONIC EQUIPMENT
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User BT400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User BT400 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info