Manual Pro-User APB220 (page 6 of 58) (English, German, Dutch, French)

677792

Zoom out

Zoom in

1/58

the rear of the vehicle’s tail light. For help locating the vehicle’s reverse light circuit

contact your vehicle’s manufacturer for

vehicle specific wiring diagrams.

10. Once you have located the reverse light

circuit you will have to route the

transmitter box power cable to that

location. You must securely fasten the

power cable to prevent it from being

caught on any vehicle component such

as the trunk hinge. Never route the

cable on the outside of the vehicle!

11. The reverse light sockets on most

vehicles have two wires connected to

them. Usually the negative wire is black

and the positive wire is a colored wire.

If you are uncertain about the wiring,

you can use a 12 volt multimeter

available at most auto parts stores to determine which is the positive wire. Follow the

manufacturer’s instructions for the safe use of the multimeter.

12. After determining which wire is the positive and which is the negative, turn off the

ignition key, then remove the battery’s negative cable.

13. Splice the red wire using the supplied in-line wire connectors to the reverse light’s

positive (+) wire. Use a set of slip joint pliers to squeeze the TAP and insure good

connection.

14. Next splice the black wire of the transmitter box power cable to the reverse light’s

negative (-) wire or ground.

15. Replace the reverse light bulb, and then re-install the light socket. Secure all the

wires with cable ties or electrical tape.

16. Re-attach the negative battery cable to the battery.

Rear View Mirror Installation

When mounting the mirror, please double check the width of your car’s rear view mirror

≤ 80mm to avoid cannot be installed.

1. Place the spring loaded top clips underneath the car’s existing rear view mirror.

Hi, is it possible to connect the model APB220 to a bigger independent dash mounted screen pls? Thanks. Submitted on 2-6-2022 at 16:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User APB220 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User APB220 Manual

Product: