807486
5
Zoom out
Zoom in
Previous page
1/26
Next page
5
OPERATION
The compressor is equipped with a Digital Tire Pressure Gauge. The digital Gauge can be used to
monitor air pressure when inflating your desired object and can automatically shut off the Compressor
once pre-set desired pressure is resached.
INFLATING TIRES
1. Open the side cover (10), roll out the 12V cord and connect the 12V plug (9) to the vehicle’s outlet.
2. Connect quick connector (8) onto tire’s valve stem and push down the valve lock lever to secure
the connection. Turn on vehicle’s engine. The compressor is now ready to use.
A. To operate compressor without pre-set function
The left side of the display panel (please see below) indicates the pre-set pressure gauge. When the
pre-set gauge is at “0.0”, it means that the compressor will work without the pre-set function.
1. Press the Pressure buttons (1) to change the shut-off pressure to “0.0”. The gauge is pre-set to
“0.0”at the factory , it means that the compressor will work in the mode without preset function if
no pre-setting.
2. The gauge will display the current tire pressure in the right area of display in big letters
3. Push the power button (2), the compressor will begin to operate. Inflate your tire the correct
pressure and shut off the compressor by pushing the power button (2) again.
4. Remove quick connector from the tire and disconnect the 12V plug.
CAUTION:
- Do Not Over Inflate! To avoid overinflation of tires please check the recommended car
tire pressure in the vehicle’s owner manual. For bycicle tires please check the tire
marking.
- We recommend to inflate 2 PSI more then recommend as the quick connector valve
leaks around 2 PSI when disconnectiong from the tire.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User AC150A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User AC150A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info