Manual Pro-User 91756 - DIAMANT I (page 33 of 52) (English, German, Dutch, French)

722055

Zoom out

Zoom in

1/52

Now test if the carrier is attached steady enough on the tow ball (and not easy to

twist). If not, you have to adjust the quick connector. If it is not tight enough,

take the carrier off again and screw in the adjustment screw of the quick

connector a little bit further. Loosen locking nut first, screw in adjustment screw

and tighten locking nut again.

Check again if the carrier is properly secured to the tow ball (and cannot rotate

easily). Repeat this until the carrier is properly secured.

Caution: Always make sure that the locking nut of the adjustment bolt is

tightened again!

When the bike carrier is not easy to turn anymore, the quick connector can be

locked. Lock the quick connector with the locking/safety slide and lock and take

the key out. Keep the key carefully on a safe place. The bike carrier is now also

protected against theft.

Always check if the quick connector is well secured with the

locking/safety slide and is locked. The carrier may never be

used if it is not secured and locked.

THE LICENSEPLATEHOLDER

The clips (2) to mount the

license plate can be

pressed out and are in the

license plate holder (see

image).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91756 - DIAMANT I in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User 91756 - DIAMANT I Manual

Product: