Manual Pro-User 91748 - DIAMANT TG (page 62 of 88) (English, German, Dutch, French)

722056

Zoom out

Zoom in

1/88

Defective parts and straps must be replaced.

The steel parts of the bike carrier are protected in the works against corrosion by

a powder coating. If this paint coating is damaged, please have the damage

rectified professionally as soon as possible.

Please refer to our customer service for the replacement of parts.

Any modification of original parts and materials or the construction of bike carrier

can adversely affect its safety and serviceability.

DISPOSAL

Local regulations must be observed for the disposal of the product.

The packaging should also be sorted by type and disposed of in the relevant

collection containers.

Further information is available from your communal disposal point.

ADJUSTMENT OF THE QUICK CONNECTOR

Carry out this maintenance operation only if the bike carrier cannot be fitted

firmly to the trailer coupling, as described in the chapter “Fitting the bike carrier

to the trailer coupling”.

Remove the bike carrier from the trailer coupling, as described under

“Dismantling the bike carrier”.

 Loosen the locking nut slightly (fig. 1).

 Screw in the setting screw one quarter of a turn (fig. 1).

 Tighten the locking nut (fig. 2)

 Check whether the carrier is now firmly seated on the trailer coupling, as

described under “Fitting the bike carrier to the trailer coupling”. If not, repeat

the above steps.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91748 - DIAMANT TG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User 91748 - DIAMANT TG Manual

Product: