Manual Pro-User 91736 - AMBER I (page 32 of 56) (English, German, Dutch, French)

722057

Zoom out

Zoom in

1/56

MOUNTING THE BIKE CARRIER

The bike carrier comes unassembled. Remove all parts from packaging and

arrange them in a well-organized way. The instructions will clearly describe and

show the parts that you need for each step and how to assemble the bike carrier.

Step 1

Parts:

Mounting:

Put the two wheel holders on the base frame of the bike carrier with the holes

right above the holes in the base frame. Then attach the wheel holders with the

four bolts M6x50, washers M6 and M6 nuts.

Mount the two lamp holders together. This is done by

means of a small piece of iron connection that is

already pre-mounted on one side. Slide the rails

“together” and fix it by the supplied screw (M5x12)

and washers.

Mount the lamp holder rail at the bottom of

the base frame with the two M5x35 bolts and

washers.

Make sure that the rear fog lamp is mounted on the left side of the bike carrier!

End result:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91736 - AMBER I in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User 91736 - AMBER I Manual

Product: