Manual Pro-User 91535 Saffier III (page 32 of 56) (English, German, Dutch, French)

601357

Zoom out

Zoom in

1/56

MOUNTING THE BIKE CARRIER

The bike carrier comes unassembled. Remove all parts from packaging and

arrange them in a well-organized way. The instructions will clearly describe and

show the parts that you need for each step and how to assemble the bike carrier.

Step 1

Parts:

Mounting:

Use the four bolts (M8x45), washers, lock-

washers and nuts to screw the mounting plate,

base frame and coupler together. The mounting

plate must be mounted on the inside of the base

frame (see picture). Make sure the hole in the

mounting plate is located exactly before the hole

in the base frame to make sure the big hex head

screw will fit through. Be sure the bolts are

inserted "inside out" (nuts and lock-washers must

be at the coupler side!)

If you tilt the inner frame (you need to pull out and

rotate the two locking pins, see explanation on page

36), it will be easier to put the mounting plate in its

place and tighten the nuts! Turn the two locking pins

back into the secure position to be sure the inner

frame will not tilt while you are mounting.

Now screw the big hex head screw (M16x90) approximately 1cm into the

coupling. (see picture).

End result:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91535 Saffier III in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User 91535 Saffier III Manual

Product: