708086

Pro-form Space Saver 700 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
11
Follow your progress with the display.
The console shows the following workout information:
Speed—This mode shows your pedaling speed,
in revolutions per minute (rpm).
Time—This mode shows the elapsed time.
Note: When a smart program is selected, the display
will show the time remaining in the program
instead of the elapsed time.
Distance—This mode shows the distance you
have pedaled, in total revolutions.
Calories—This mode shows the approximate
number of calories you have burnt.
Pulse—This mode shows your heart rate when
you use the handgrip pulse sensor.
Level—This mode shows the level of resistance of the
pedals.
HOW TO USE THE CONSOLE
Make sure that the product is correctly plug (see page HOW
TO PLUG THE POWER ADAPTER page 10). If there is a
sheet of clear plastic on the face of the console, remove it.
1. Turn on the console :
To turn on the console, press any button on the console or
simply begin pedaling.
2. Press the buttons :
M (MODE) : Press this button to validate the adjusted
values.
UP and DOWN : Slide your nger on the circle to increase
or decrease the values or to set the resistance.
START/STOP : For a quick start : you can start the
console without selecting any program. TIme starts
counting from 0.
RECOVERY :
Press this button to activate the recovery test (availbale
only at the end of a program).
BODY FAT :
Press this button to activate the Body Fat test.
RESET :
Press this button to reset the values.
3. Select a user :
When you will turn on your computer, the word U1 will
ash. Select a user from U1 to U4 by sliding your nger on
the up and down button, then validate by pressing the M
button.
Select your prole : man or woman by sliding your nger
on the up and down button, then validate by pressing the
M button.
Select your age by sliding your nger on the up and down
button, then validate by pressing the M button.
Select your height and weight in the same way.
4. Select a program
Select your program by sliding your nger on the up and
down button, then validate by pressing the M button.
Press the START/STOP button to start your program.
5. Start pedaling and follow your progress with the
display :
While you exercise, the console will display the selected
mode.
6. When you are nished exercising, the console will
automatically turn off.
If the pedals do not move for a few seconds, the console
will turn off automatically. At the end of a program you’ll
hear a tone and the program will ash.
How to use the Pulse Recovery Test :
It is a function to check the condition of pulse recovery
that is scaled from 1.0 to 6.0 while 1.0 means the best
and 6.0 means the worst and the increment is 0.1. In
order to get rated correctly, users must test it right after
the workout nished by pressing “TEST(RECOVERY) ”
key and then stop exercising. After the key is pressed,
please also apply the heart rate detector appropriately,
the test will last for 1 minute and the result will show in the
display. If the computer does not detect your current heart
rate, pressing “TEST(RECOVERY) ” will not enter into
pulse recovery test. During the pulse recovery test, press
“TEST(RECOVERY) ” to exit the test and return to the
stop status.
par minutes (RPM).
Caution : These data have no medical purpose, it just
to gives you an approximate idea of your shape after
your exercice.
BODYFAT TEST :
1. Turn on the console
To turn on the console, press any button on the console or
simply begin pedaling.
CONSOLE FEATURES
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form Space Saver 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form Space Saver 700 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info