Manual Pro-form Razor 400ES (page 18 of 24) (English)

708080

Zoom out

Zoom in

1/24

Inspect and tighten all parts of the elliptical exerciser

regularly. Replace any worn parts immediately.

To clean the elliptical exerciser, use a damp cloth and

a small amount of mild soap. Important: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

BATTERY REPLACEMENT

If the console displays become dim, the batteries

should be replaced; most console problems are the

result of low batteries. See assembly step 5 on page 8

for replacement instructions.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function proper-

ly, see step 5 on page 16.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. First, remove all of the

screws from both side shields; there are four sizes of

screws in the side shields—note which size of

screw you remove from each hole. Then, gently pry

the side shields away from the frame.

Next, locate the

Reed Switch (58).

Turn the Left

Pedal Disc (26)

until the Magnet

(41) is aligned

with the Reed

Switch. Loosen,

but do not

remove, the indi-

cated M4 x

12mm Screw

(99). Slide the

Reed Switch slightly closer to or away from the

Magnet, and then retighten the Screw. Rock the Left

Pedal Disc forward and backward just enough that the

Magnet passes the Reed Switch repeatedly. Repeat

until the console displays correct feedback. When the

Reed Switch is correctly adjusted, reattach the side

shields. Note: If you have questions as to which screw

should be in which hole, see EXPLODED DRAWING

B on page 23 and the PART LIST on page 20.

HOW TO ADJUST THE BELT

If you can feel the pedals slip while you are pedaling,

even when the resistance of the pedals is at the high-

est setting, the Belt (46) may need to be adjusted.

First, remove all the screws from both side shields;

there are four sizes of screws in the side shields—

note which size of screw you remove from each

hole. Then, gently pry the side shields away from the

frame.

Next, turn the

Belt Adjustment

Screw (72) until

the Belt (46) is

tight. Then, reat-

tach the side

shields. Note: If

you have ques-

tions as to which

screw should be

in which hole,

see EXPLODED

DRAWING B on page 23 and the PART LIST on page

20.

MAINTENANCE AND TROUBLESHOOTING

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form Razor 400ES in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-form Razor 400ES Manual

Product: