553952

Pro-form POWER 995 C - PFTL99912 Manual

24
Zoom out
Zoom in
Previous page
1/36
Next page
24
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
1. Select the information mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
The Time display will
show the total number
of hours the treadmill
has been used.
The Distance display
will show the total
number of miles or kilo-
meters that the walking
belt has moved.
2. Select the optional screens.
While the information mode is selected, the matrix
will display several optional screens. Press the
decrease button next to the Enter button to select
each of the following screens:
UNITS—To change the unit of measurement, press
the Enter button. To view distance in miles, select
ENGLISH. To view distance in kilometers, select
METRIC.
DEMO—The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. While the demo mode is turned
on, the console will function normally when you
plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the center display. To turn on or
turn off the demo mode, press the Enter button or
the Speed decrease button.
CONTRAST LVL—Press the Incline increase and
decrease buttons to adjust the contrast level of the
displays. Then, press the Enter button.
If a module is connected, you may also select the
following screens:
MODULE—If an iFit module is connected, the dis-
play will show the word WIFI. If a USB module is
connected, the display will show the word USB/SD.
AUDIO COACH—To turn on or turn off the audio
coach, press the Enter button.
If an iFit module is connected, you may also select
the following screens:
START MODE—The start mode will appear when
you insert the key into the console or when you
press the Home button. Press the Enter button
repeatedly to select the manual mode or the iFit
mode as the start mode.
CHECK WIFI—Press the Enter button. The cen-
ter display will show the software version number,
the network SSID, the network encryption type,
the wireless signal strength, the IP address of the
module, the number of registered users and their
names, and the results of the DNS lookup.
SEND/OBTAIN DATA—To send and receive work-
outs, workout logs, and updates, press the Enter
button.Whentheprocessisnished,thewords
TRANSFERS DONE will appear in the display.
3. Exit the information mode.
To exit the information mode, remove the key from
the console.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form POWER 995 C - PFTL99912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form POWER 995 C - PFTL99912 in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info