553937
14
Zoom out
Zoom in
Previous page
1/36
Next page
14
16. Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
O
rient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
AttachtheLatchBracket(6)and StorageLatch
(
51)to theBase(95)withtwo 3/8" x 2" Bolts (8)
and two 3/8" Nuts (10).
Attach the upper end of the Storage Latch (51)
to the bracket on the Frame (55) with a 3/8" x 2"
Bolt (8) and a 3/8" Nut (10). Note: It may be
necessary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lowerthe Frame(55) (see HOW TO LOWER
THE TREADMILL FORUSE on page 24).
16
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 26 and 27).
51
95
10
Large
Barrel
8
55
10
6
8
Latch Knob
14


Need help? Post your question in this forum.

Forumrules
1

Forum

pro-form-900-zlt---petl10810

Reset search

  • Bonjour,
    Je vous contacte pour information car je rencontré une panne sur mon tapis 900 zlt.
    Il a cessé de fonctionner après avoir fait disjoncté le tableau électrique.
    Lors de la remiseen service le tableau s'allume mais des que l'on remet le tapis à tourner ça disjoncté cte à nouveau.
    Avez-vous déjà rencontré ce problème ou pouvez-vous me renseigner sur la panne.
    Cordialement
    Benoit Submitted on 22-9-2021 at 18:27

    Reply Report abuse
  • Bonjour,
    Je vous contacte pour information car je rencontré une panne sur mon tapis 900 zlt.
    Il a cessé de fonctionner après avoir fait disjoncté le tableau électrique.
    Lors de la remise en service le tableau s'allume mais des que l'on remet le tapis à tourner ça disjoncté cte à nouveau.
    Avez-vous déjà rencontré ce problème ou pouvez-vous me renseigner sur la panne.
    Cordialement
    Benoit Submitted on 22-9-2021 at 18:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 900 ZLT - PETL10810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 900 ZLT - PETL10810 in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 900 ZLT - PETL10810

Pro-form 900 ZLT - PETL10810 User Manual - German - 36 pages

Pro-form 900 ZLT - PETL10810 User Manual - Dutch - 36 pages

Pro-form 900 ZLT - PETL10810 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info