Manual Pro-form 505 ZLE - PFEVEL96010 (page 12 of 28) (English)

554133

Zoom out

Zoom in

1/28

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor has two components: a chest

trap and a sensor unit (see the drawing below). Insert

the tab on one end of the chest strap into one end of

the sensor unit, as shown in the inset drawing. Press

the end of the sensor unit under the buckle on the

chest strap. The tab should be flush with the front of

the sensor unit.

Next, wrap the chest

pulse sensor around

your chest and attach

the other end of the

chest strap to the sen-

sor unit. Adjust the

length of the chest

strap, if necessary. The

chest pulse sensor should be under your clothes, tight

against your skin, and as high under the pectoral mus-

cles or breasts as is comfortable. Make sure that the

logo on the sensor unit is facing forward and is right-

side-up.

Pull the sensor unit away from your body a few inches

and locate the two electrode areas on the inner side

(the electrode areas are covered by shallow ridges).

Using saline solution such as saliva or contact lens

solution, wet both electrode areas. Return the sensor

unit to a position against your chest.

CARE AND MAINTENANCE

• Dry the chest pulse sensor after each use. The

chest pulse sensor is activated when you wet the

electrode areas and put on the chest pulse sensor;

the chest pulse sensor shuts off when it is removed

nd the electrode areas are dried. If the chest pulse

sensor is not dried after each use, the battery may

e drained prematurely.

• Store the chest pulse sensor in a warm, dry place.

Do not store the chest pulse sensor in a plastic bag

or other container that may trap moisture.

• Do not expose the chest pulse sensor to direct sun-

light for extended periods of time or to temperatures

above 122° F (50° C) or below 14° F (-10° C).

• Do not excessively bend or stretch the sensor unit

when using or storing the chest pulse sensor.

• Clean the sensor unit using a damp cloth—never

use alcohol, abrasives, or chemicals. Hand wash

and air dry the chest pulse sensor.

TROUBLESHOOTING

If the chest pulse sensor does not function prop-

erly, try the suggestions below.

• Make sure that you are wearing the chest pulse sen-

sor as described at the left. Note: If the chest pulse

sensor does not function when positioned as

described, move it slightly lower or higher on your

chest.

• Use saline solution such as saliva or contact lens

solution to wet the two electrode areas on the sen-

sor unit. If heart rate readings do not appear until

you begin perspiring, re-wet the electrode areas.

• Position yourself near the console. For the console

to display heart rate readings, the user must be

within armʼs length of the console.

• The chest pulse sensor is designed to work with

people who have normal heart rhythms. Heart rate

reading problems may be caused by medical condi-

tions such as premature ventricular contractions

(pvcs), tachycardia bursts, and arrhythmia.

• The operation of the chest pulse sensor can be

affected by magnetic interference caused by high

power lines or other sources. If it is suspected that

this is a problem, try relocating the elliptical.

HOW TO USE THE CHEST PULSE SENSOR

Chest Strap

Sensor Unit

Tab

Buckle

Sensor

Unit

Logo

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 505 ZLE - PFEVEL96010 in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 505 ZLE - PFEVEL96010

Pro-form 505 ZLE - PFEVEL96010 User Manual - German - 28 pages

Pro-form 505 ZLE - PFEVEL96010 User Manual - Dutch - 28 pages

Pro-form 505 ZLE - PFEVEL96010 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-form 505 ZLE - PFEVEL96010 Manual

Product: