553945
20
Zoom out
Zoom in
Previous page
1/36
Next page
20
HOW TO USE A CALORIE WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page17.
2. Select a calorie workout.
To select a calorie workout, press the Calorie
Workouts button repeatedly until the desired work-
out appears in the display.
When you select a calorie workout, the maximum
incline level of the workout will flash in the lower left
display, the maximum speed setting will flash in the
lower right display, and the approximate number of
calories you will burn will flash in the upper display.
In addition, a profile of the speed settings of the
workout will scroll across the display.
3. Enter your weight if desired.
For the most accurate calorie count, enter your
weight into the console by pressing the Wt. in-
crease and decrease buttons repeatedly. Note:
Once you have entered your weight, your weight
will be saved in memory.
4. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.
During the workout, the profile will show your
progress. The flashing segment of the profile repre-
sents the current segment of the workout. The
height of the flashing
segment indicates the
speed setting for the cur-
r
ent segment. At the end
of each segment, a se-
r
ies of tones will sound.
If a different speed
and/or incline setting is
programmed for the next segment, the speed
and/or incline setting will flash in the display to alert
you and the treadmill will automatically adjust to the
new speed and/or incline setting.
When the workout ends, the walking belt will slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
5. Follow your progress with the displays.
See step 6 on page 18.
6. Measure your heart rate if desired.
See step 7 on page 19.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 19.
Current Segment
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 500 ZLT - PETL59910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 500 ZLT - PETL59910 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 500 ZLT - PETL59910

Pro-form 500 ZLT - PETL59910 User Manual - German - 36 pages

Pro-form 500 ZLT - PETL59910 User Manual - Dutch - 36 pages

Pro-form 500 ZLT - PETL59910 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info