553945
11
Zoom out
Zoom in
Previous page
1/36
Next page
11
9
104
111
Console Assembly
116
1
16
1
06
10. Identify the Right Handrail (101) which is
marked with a “Right” sticker. Remove the tie
from the Right Handrail. If necessary, press the
M8 Cage Nut (34) back into place.
Hold the Right Handrail (101) near the console
assembly. Route the console wire around the
side of the Right Handrail as shown, and
through the slot in the Right Handrail.
If necessary, adjust the Console Frame (111) to
align the holes in the Right Handrail (101) with
the holes in the Console Frame.
Attach the Right Handrail (101) to the Console
Frame (111) and the console assembly with two
M8 x 25mm Patch Bolts (5), two M8 Star
Washers (10), an M5 x 16mm Bolt (108), and a
1/4" Star Washer (73). Make sure the console
wire is not pinched. Start all three Bolts, and
then tighten all of them.
Attach the Left Handrail (not shown) as de-
scribed above. Note: There is not a wire on
the left side.
Tighten the #8 x 1" Screws (107). Be carful not
to overtighten the Screws.
101
108
5
111
Slot
Tie
10
10
73
Console
Wire
Console
Assembly
34
9. Set the console assembly face down on a soft
surface to avoid scratching the console.
L
oosen the four #8 x 1" Screws (107). Carefully
pivot the Console Frame (111) to the position
s
hown. Do not pivot the Console Frame too
far or you will break the ground wire.
Identify the Left and Right Accessory Trays
(104, 106). Attach the Accessory Trays to the
console assembly with eight M4 x 13mm Screws
(116).
Carefully pivot the Console Frame (111) back
down to the console assembly.
107
107
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 500 ZLT - PETL59910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 500 ZLT - PETL59910 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 500 ZLT - PETL59910

Pro-form 500 ZLT - PETL59910 User Manual - German - 36 pages

Pro-form 500 ZLT - PETL59910 User Manual - Dutch - 36 pages

Pro-form 500 ZLT - PETL59910 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info