708081
17
Zoom out
Zoom in
Previous page
1/32
Next page
17
HOW TO USE A CLASSIC WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
1
5.
2. Select a classic workout.
To select a classic work-
out, press the iFit
Classic Workouts button
repeatedly until the num-
ber of the desired work-
out appears in the dis-
play.
When you select a classic workout, the maximum
incline level of the workout will flash in the lower left
display, the maximum speed setting will flashin the
lowerright display,and then the workout duration
will appear in the upper display. In addition,a profile
of the speed settings of the workout will scroll
across the display.
3. Enter your weight if desired.
For the most accurate calorie count, enter your
weight into the console by pressing the Wt. in-
crease and decrease buttons repeatedly. Note:
Once you have entered your weight, your weight
will be saved in memory.
4. Select the duration of the workout if desired.
If you have selected a classic workout, you can set
the duration of the workout to a time between 15
and 45 minutes, in increments of 5 minutes. To set
the duration of the workout press the Time increase
or decrease button until the desired time is se-
lected. The new workout settings will appear in the
displays.
5. Press the Go button or the Speed increase but-
ton to start the workout.
A moment after you press the button, the treadmill
will automatically adjust to the first speed and in-
cline settings of the workout. Hold the handrails and
beginwalking.
Each workout is divided into 30 one-minute seg-
ments, unless you have changed the length of the
workout (see step 4). One speed setting and one
incline setting are programmed for each segment.
Note: The same speed setting and/or incline setting
may be programmed for consecutive segments.
Duringthe workout, the
p
rofile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The heightof the flashing
segment indicates the
speedsetting for the current segment. At the end of
each segment, a series of tones will sound and the
next segment of the profile will begin to flash. If a
different speed and/or inclinesetting is programmed
for the next segment, the speed and/or incline set-
ting will flashin the displayto alert you and the
treadmill will automatically adjust to the new speed
and/or incline setting.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline
buttons; however, when the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To stop the workout at any time, press the Stop
button. Torestart the workout,press theGo button
or the Speedincrease button. The walking belt will
beginto move at 1 mph. Whenthe next segmentof
theworkout begins, the treadmill willautomatically
adjust to thespeedand inclinesettings forthe next
segment.
6. Follow your progress with the displays.
See step 6 on page 16.
7. Measure your heart rate if desired.
See step 7 on page 16.
8. When you are finished exercising, remove the
key from the console.
See step 8 on page 16.
Current Segment
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 480E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 480E in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info