708083
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
8. Hand tighten four additional Screws (3) into the
H
andrail (20) and the console assembly. Then,
tighten all nine Screws used in step 7 and
this step; do not overtighten the Screws.
P
lug in the power cord as described on page 11,
and turn on the power as described on page 13.
Note: The treadmill may automatically rise to the
maximum incline level and then return to the
minimum level.
Console Assembly
3
20
8
3
10.Place the treadmill in the storage position (see
HOW TO FOLD AND MOVE THE TREADMILL
on page 24).
Next, place the cylinder end of the Shock (92)
near the bracket on the base of the Uprights
(84).
See the two small inset drawings. Using your fin-
gernail or the end of a screwdriver, press on the
end of the Shock Pin (25) to loosen it from the
Shock (92). Next, rotate the Shock Pin and pull it
out of the Shock. Be careful to avoid losing
the Shock Pin.
See drawing 10a. Press the cylinder end of the
Shock (92) onto the ball on the bracket. Next, in-
sert the end of the Shock Pin (25) through two of
the small holes in the end of the Shock. Then,
rotate the Shock Pin until it clips onto the Shock.
92
25
92
25
10
10a
84
58
Bracket
Cylinder
Bracket
25
25
9. Attach the Latch Housing (73) to the left Upright
(84) with two Screws (3). Make sure that the
large hole in the Latch Housing is on the
side shown. Do not overtighten the Screws.
If the pin is not preassembled in the Latch
Housing (73), remove the knob from the pin.
Make sure that the collar and the spring are on
the pin as shown. Insert the pin into the Latch
Housing, and tighten the knob back onto the pin.
3
84
9
Knob
Pin
Collar
Large
Hole
Spring
73
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 480 CX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 480 CX in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info