554007

Pro-form 400 ZLE - PFEVEL74910 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Inspect and tighten all parts of the elliptical regularly.
Replace any worn parts immediately.
To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the con-
sole and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
If the console displays become dim, replace all the
batteries at the same time; most console problems are
the result of low batteries. See assembly step 6 on
page 8 for replacement instructions.
If the handgrip pulse sensor does not function prop-
erly, see step 5 on page 18.
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, you must remove the left
pedal, the rear shield cover, the top shield cover, and
the left shield (see the instructions below).
First, see step 16 on page 13 and remove the left
pedal.
Next, see step 17 on page 13 and remove the rear
shield cover.
Then, see step 4 on page 7 and release the top
shield cover. Slide the top shield cover upward.
Remove the M4 x 16mm Screws (92) from the Left
Shield (44). Then, gently raise the front of the Left
Shield and slide the rear of the Left Shield outward
over the Left Pedal Arm (14).
Next, locate and loosen the Pivot Screw (88). Then,
tighten the Drive Belt Adjustment Screw (72) until the
Drive Belt (46) is tight.
When the Drive Belt (46) is tight, tighten the Pivot
Screw (88).
Then, reattach the left shield, the top shield cover, the
rear shield cover, and the left pedal.
MAINTENANCE AND TROUBLESHOOTING
88
72
46
92
14
44
92
92
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 400 ZLE - PFEVEL74910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 400 ZLE - PFEVEL74910 in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 400 ZLE - PFEVEL74910

Pro-form 400 ZLE - PFEVEL74910 User Manual - German - 28 pages

Pro-form 400 ZLE - PFEVEL74910 User Manual - Dutch - 28 pages

Pro-form 400 ZLE - PFEVEL74910 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info