Manual Pro-form 300 ZLX - PFEVEX74010 (page 19 of 24) (English)

554404

Zoom out

Zoom in

1/24

nspect and tighten all parts of the exercise bike regu-

larly. Replace any worn parts immediately.

To clean the exercise bike, use a damp cloth and a

mall amount of mild soap. IMPORTANT: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

CONSOLE TROUBLESHOOTING

If the console display becomes dim, replace all the

batteries at the same time. See assembly step 6 on

page 8 for replacement instructions.

If the console does not display your heart rate when

you use the handgrip pulse sensor, see step 5 on

page 15.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. To adjust the reed

switch, you must first remove the left pedal, the left

disc cover, and the left pedal disc (see the instructions

below).

Using an adjustable wrench, turn the left pedal clock-

wise and remove it.

Next, rotate the

Left Crank Arm

(20) to a vertical

position with the

end of the Left

Crank Arm point-

ing downward.

Using a flat

screwdriver,

release the tabs

on each point of

the left Disc

Cover (18). Carefully work the left Disc Cover over the

Left Crank Arm (20) and remove the left Disc Cover.

ext, rotate the Left

Crank Arm (20) to a

vertical position with

the end of the Left

rank Arm pointing

upward. Rotate the

left Pedal Disc (17)

clockwise to release

it from the Left Shield

(11). Then, work the

left Pedal Disc upward and remove it from the Left

Crank Arm (20).

Locate the Reed Switch (57). Loosen, but do not

remove, the two M4 x 12.7mm Flange Screws (63).

Next, rotate the Left Crank Arm (20) until a Magnet

(55) is aligned with the Reed Switch (57). Slide the

Reed Switch slightly toward or away from the Magnet.

Then, retighten the M4 x 12.7mm Flange Screws (63).

Rotate the Left Crank Arm (20) for a moment. Repeat

these actions until the console displays correct feed-

back.

When the reed switch is correctly adjusted, reattach

the left pedal disc, the left disc cover, and the left

pedal.

MAINTENANCE AND TROUBLESHOOTING

Tab

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 300 ZLX - PFEVEX74010 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 300 ZLX - PFEVEX74010

Pro-form 300 ZLX - PFEVEX74010 User Manual - German - 24 pages

Pro-form 300 ZLX - PFEVEX74010 User Manual - Dutch - 24 pages

Pro-form 300 ZLX - PFEVEX74010 User Manual - French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-form 300 ZLX - PFEVEX74010 Manual

Product: