554402

Pro-form 100 ZLX - PFEVEX71910 Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
19
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while
t
he resistance is adjusted to the highest setting, the
drive belt may need to be adjusted.
To adjust the drive belt, you must remove the seat
post, the adjustment knob, the top shield, the right
pedal, and the right shield (see the instructions
below).
To remove the Seat Post (5), loosen the Seat Post
Knob (11) a few turns, pull the Seat Post Knob out-
ward, and remove the Seat Post. Then, using an
adjustable wrench, remove the Seat Post Knob.
Using a flat screwdriver, release the tabs along the
bottom edge of the Top Shield (9) and slide the Top
Shield upward. Then, using an adjustable wrench, turn
the Right Pedal (26) counterclockwise and remove it.
Remove all the screws from the left and right shields;
there are two sizes of screws in the shields—note
which size of screw you remove from each hole.
T
hen, gently pull the right shield away from the frame.
L
oosen the M6 x 20mm Hex Screw (60). Then, tighten
the M10 x 50mm Hex Screw (33) until the Drive Belt
(23) is tight.
When the Drive Belt (23) is tight, tighten the M6 x
20mm Hex Screw (60).
Then, reattach the left and right shields, the right
pedal, the top shield, the adjustment knob, and the
seat post.
9
11
26
5
60
33
23
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 100 ZLX - PFEVEX71910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 100 ZLX - PFEVEX71910 in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 100 ZLX - PFEVEX71910

Pro-form 100 ZLX - PFEVEX71910 User Manual - German - 24 pages

Pro-form 100 ZLX - PFEVEX71910 User Manual - Dutch - 24 pages

Pro-form 100 ZLX - PFEVEX71910 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info