491334
39
Zoom out
Zoom in
Previous page
1/46
Next page
EN
16
5.2 WASH-AND-DRY PROGRAMME
Automatic washing and drying can be carried out in the tough fabrics (cotton and colours) and synthetic/delicate
fabrics programmes. If the wool wash programmes are selected, automatic drying after the wash cannot be set.
For automatic washing and drying, the load of laundry must not exceed 4 kg of cotton or 2 kg of synthetic fab-
rics.
Therefore, if the load for washing and drying exceeds the quantities stated above, a wash+dry programme is not
recommended; the load will have to be halved after washing and dried in two lots.
To set a wash-and-dry programme proceed as follows:
1. Select the washing programme and make any changes to the default parameters;
2. Press the dry button to set the drying time required. The display initially shows the maximum time which can
be set (2h:40’), which is then gradually reduced to 0h:00’
Whether drying will be at the normal temperature (90°C) or the delicate fabrics temperature (60°C) depends
on the washing programme set previously.
Once a drying time has been set, the symbol on the display flashes; it remains constantly on once the cycle
enters the drying stage.
5.3 DRY ONLY PROGRAMME
1. Turn the appliance off by turning the washing/drying programmes selector knob to OFF.
2. Turn the knob to the drying programme required: Intensive drying: for normal drying (90°C), or Gentle drying:
for delicate fabrics (60°C). To find out which symbol identifies each drying programme, refer to the pro-
grammes table supplied with the appliance.
3. Press the Dry button repeatedly to set the drying time required (see previous point).
4. Press the "Start-Pause” button to start the drying programme. The display shows the time remaining and the
drying symbol LED lights up.
Attention
Since no washing programme has been set previously, there are no constraints on selection of the drying
programme (normal or gentle). Remember that normal drying is recommended for cotton and coloureds, and
gentle drying for synthetic and delicate items.
For good drying results, the load of laundry must not exceed 4kg of cotton or 2kg of synthetic fabrics.
5.4 INTERRUPTING OR CHANGING THE DRYING PROGRAMME
1. The drying programme can be interrupted by the same procedures as the washing programme.
2. To end the programme and remove the laundry, it is best first to cool the load. Use the selector button to set
a drying time of 20 minutes. Restart the appliance as described above and the laundry will be ready for re-
moval.
Drying symbol
Drying button
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PWD 1646 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PWD 1646 in the language / languages: English, German as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info