712201

Privileg PRC871 Manual

8
Zoom out
Zoom in
Previous page
1/44
Next page
8
Thermostat setting
• TThe thermostat automatically
regulates the inside temperature of
the refrigerator compartment and
freezer compartment. By rotating the
knob from position 1. to 5., colder
temperatures can be obtained.
• The “
•
“ position shows thermostat
is closed and no cooling will take
place.
• For short-term storage of food in the freezer compartment, you can set the knob between
minimum and medium positions (1-3).
• For long-term storage of food in the freezer compartment, you can set knob to the
• medium position (3-4).
Note that: The ambient temperature, temperature of the freshly stored food and how often the
door is opened, affects the temperature in the refrigerator compartment. If required, change the
temperature setting.
• When you first switch on the appliance, leave the appliance running continuously for 24 hours in
order to reach operating temperature.
• During this time, try to limit the number of times that the door is opened and do not store a large
quantity of food in the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or
plugging the unit in. This avoids damage to the compressor.
• The freezer of the refrigerator can cool up to -18°C .
• This appliance is designed for use at an ambient temperature within the 16°C - 32°C range.
Super switch (If super switch is available)
• Normally set this switch to ‘0’ position. Except when the
ambient temperature is low like in winter. (ie.below 16°C)
or when the freezer temperature needs to be maintained
lower. In that case, turn the switch to ‘1’ position ON.
• To set super switch ON that is on the thermostat box, press
the switch down to ‘1’ position. The switch will lit.
• When the freezer compartment is cooled down to sufficient
temperature, or the weather gets hot, turn the super switch off to save electrical consumption.
• When you first switch on the appliance, for starting a suitable cooling, the appliance should work
24 hours continuously until it cools down to sufficient temperature.
• In this time do not open the door so often and place a lot of food inside the appliance.
If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or
re-plugged the unit in order not to damage the compressor.
Super freezing: If ambient temperature is more than 16°C, this switch must be used as superfreeze
switch.For maximum freezing capacity, the switch must be turned on 24h before the placing fresh
foods. After placing fresh food in the freezer, 24 hours ON position is generally sufficient. In order to
save energy, please turn off this switch after 24 hours from placing fresh food.
Warnings for Temperature Settings
• The ambient temperature, temperature of the freshly stored food and how often the door
is opened, affects the temperature in the refrigerator compartment. If required,change the
temperature setting.
HOW TO OPERATE THE APPLIANCE
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PRC871 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PRC871 in the language / languages: English, German as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info