712217
12
Zoom out
Zoom in
Previous page
1/36
Next page
12
Replacing the light bulb
When replacing the bulb of the fridge;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top
and remove the light cover
3. Change the present light bulb with a new one of not
more than 15 W.
4. Replace the light cover and after waiting 5 minutes plug the unit.
Replacing LED Lighting
If your fridge has LED lighting contact the help desk as this should be changed by authorized
personnel only.
Transportation and Changing of Installation Position
The original packages and foamed polystyrene (PS) can be retained if required.
During transportation, the appliance should be secured with a wide string or a strong rope. The
instructions written on the corrugated box must be followed while transporting.
Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper…) should be taken out or fixed with bands in order to prevent them from
getting damaged.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if:
There is a power failure,
The mains plug is not plugged in properly, or is loose
The thermostat setting is on position “•”,
The socket is defective. To check this, plug in another appliance that you know is working into
the same socket.
The appliance performs poorly,
Check if:
You have overloaded the appliance,
The doors are not closed properly,
There are not enough ventilation ducts on the kitchen unit as mentioned in the Installation
Manual.
If there is noise:
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling sound)
even when the compressor is not running. Do not worry, this is quite normal. If you hear a different
sound,
check if:
The appliance is installed firmly as described in the Installation Manual.
The objects on the appliance are vibrating.
BEFORE CALLING YOUR AFTER SALES
SERVICE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PRC846 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PRC846 in the language / languages: English, German as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info