712218
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Transportation and changing of Installation position
The original packages and foamed polystyrene (PS) can be retained if required.
During transportation, the appliance should be secured with a wide string or a strong rope. The
instructions written on the corrugated box must be followed while transporting.
Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper…) should be taken out or fixed with bands in order to prevent them from
getting damaged.
Carry your fridge in the upright position.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
If your fridge is not working properly, it may be a minor problem, therefore check the following.
The appliance does not operate,
Check if:
There is a power failure.
The mains plug is not plugged in properly, or is loose.
The thermostat setting is on position ““.
The socket is defective. To check this, plug in another appliance that you know is working into
the same socket.
The appliance performs poorly,
Check if:
You have overloaded the appliance.
The door is not closed properly.
There are not enough ventilation ducts in the kitchen unit as mentioned in the installation manual.
If there is noise:
The cooling gas which circulates in the fridge circuit may make a slight noise (bubbling sound) even
when the compressor is not running. Do not worry, this is quite normal. If you hear different sounds,
check if:
The appliance is installed firmly as described in the installation manual.
Objects on the appliance are vibrating.
If there is water in the lower part of the fridge,
Check if:
The drain hole for water is not clogged (use defrost drain plug to clean the drain hole).
BEFORE CALLING YOUR AFTER SALES
SERVICE
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PRC838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PRC838 in the language / languages: English, German as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info