712206
5
Zoom out
Zoom in
Previous page
1/32
Next page
5
EN
WARNING
Keep ventilation openings, in
the appliance enclosure or in
the built-in structure, clear of
obstruction.
WARNING
Automatic ice-makers and/or
water dispensers must be
connected to a water supply
that delivers potable water
only, with main water pressure
between 0,17 and 0,81 MPa (1,7
and 8,1 bar).
To guarantee adequate ventila-
tion, leave a space on both
sides and above the appliance.
The distance between the rear
of the appliance and the wall
behind the appliance should
be at least 50mm.
A reduction of this space will
increase the Energy consump-
tion of product.
INTENDED USE
OF THE PRODUCT
This appliance is designed
solely for use as domestic
usage. To aim the appliance as
professional use is forbidden.
The manufacturer declines
allresponsibility for innapropi-
ate use or incorrect setting of
the controls.
The appliance is not intended
to be operated by means of an
external timer or separate
remote control system.
Do not use the appliance
outdoors.
This appliance is intended to
be used in household and
similar
applications such as:
– sta kitchen areas in shops,
oces and other working
environments;
– farm houses and by clients in
hotels, motels and other resi-
dential type environments;
– bed and breakfast type
environments;
– catering and similar non-
retail applications.
The bulb used inside the appli-
ance is specically designed for
domestic appliances and is not
suitable for general room
lighting within the home (EC
Regulation 244/2009).
INSTALLATION
Only activate the appliance
when the installation proce-
dure has been completed.
Installation and repairs must
be carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part
of the appliance unless speci-
cally stated in the user manual.
Use protective gloves to per-
form all unpacking and instal-
lation operations.
The appliance must be discon-
nected from the power supply
before carrying out any instal-
lation operation.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
After-sales Service.
During installation, make sure
the appliance does not dam-
age the power cable.
The appliance must be han-
dled and installed by two or
more persons.
When installing the appliance
make sure that the four feet are
stable and resting on the oor,
adjusting them as required,
and check that the appliance is
perfectly level using a spirit
level.
Wait at least two hours before
switching the appliance on, to
ensure that the refrigerant
circuit is fully ecient.
Make sure the appliance is not
near a heat source.
ELECTRICAL WARNINGS
Make sure the voltage speci-
ed on the rating plate corre-
sponds to that of your home.
The power supply ranges are
indicated on the rating plate.
Regulation require that the
appliance is earthed.
For installation to comply with
current safety regulations, an
omnipolar switch with mini-
mum contact gap of 3mm is
required.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in compli-
ance with the manufacturer
instruction and current safety
regulations. Contact an author-
ized service center.
The electrical components
must not be accessible to the
user after installation.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PRB385W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PRB385W in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Privileg PRB385W

Privileg PRB385W User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info