491523

Privileg PDSX 6232 Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
Before using the dishwasher, read the installation and maintenance instructions carefully!
1
GB
5019 696 01018
PDSX 6232
1) Programme data obtained in conformity with European standard EN 50242. The data may vary, for example, according to different loads,
extra functions, sensor settings (only with sensor programmes), water supply temperatures, water hardness and power supply voltage.
2) Programme for energy data label in conformity with EN 50242. - Information for Test Laboratories:
for detailed information on the
EN/Standard loading comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.
3) The antibacterial action has been proven in collaboration with the Pasteur Institute of Lille (France), in conformity with.
Standard NF EN 13697 of November 2001.
1. OVERVIEW
Programme selection button
Press the button (repeatedly) until the indicator lamp of the
desired programme lights up (see table 1.1).
At the end of the wash cycle, the last programme selected is
memorized.
Antibacterial +
3)
This function activates an antibacterial rinse at the end of the wash
cycle, guaranteeing a further reduction of bacteria. Press the button to
activate or deactivate the function. This function can be used with
those programmes marked with the relative symbol in table 1.1.
The dishwasher door must be kept shut for the entire duration of
the programme in order to guarantee reduction of bacteria. If the
door is opened the indicator lamp starts flashing.
At the end of the programme, the most recently selected setting
remains memorised.
Detergent setting upon initial use and when using a different type
of detergent
Indicator lamp off = Powder/gel detergent (factory setting).
If using combined detergents, press and hold the button for 3
seconds; the indicator lamp lights up = rinse aid and salt indicators
are deactivated.
From water hardness level 5, the salt indicator remains active.
At the end of the programme, the most recently selected setting
remains memorised.
Fault indication and wash time display
In normal operation it indicates the remaining time (h:min),
whereas with “Delayed start” selected it indicates the time
remaining until programme start (e.g. h 01). If using a sensor
programme, a dotted line indicates that the calibration process
is underway (lasting up to 20 minutes).
In the presence of a fault indication “F.. / E..” - , refer to Section
5 “What to do if...”.
Delayed start button
Push the button (repeatedly) to delay the start of the
programme. Adjustable from 1 to 24 hours. With each press of
the button, the delayed start indicator increases by 1 hour, and
after “h 24” returns to “h 00”. Then press the START button.
The wash programme will start after the set time.
Start/Resume button
The indicator lamp lights up during operation, flashes when the
programme is interrupted before completion and switches off at
the end of the programme.
Cancel/Off button
Press the button to switch the dishwasher off or to interrupt the
selected programme. If the Cancel/Off indicator lamp flashes
repeatedly, this indicates a fault: see chapter 5 “What to do if...”.
Salt level indicator and rinse aid level indicator
These light up at the end of the programme if salt or rinse aid
needs topping up.
Only add just before starting a wash cycle.
Table 1.1.
Overview of programmes
Detergent
dispenser
Consumption
1)
P
Programmes
Available
options
Description of programme large small Litres kWh Minutes
1
AUTO 50-65°C
Recommended programme for
routine washes, with dried-on food
(e.g. EN 50242).
X X 7-14 1.00-1.60 70-155 ±
1)
2
PRE-RINSE cold
Crockery to be washed later. — — 4.0 0.03
14 ±
1)
3
GLASSES 40°C
Light soiling, for example glasses
and cups.
X — 10.0 0.85 100 ±
1)
4
QUICKWASH 45°C
Lightly soiled crockery, with no
dried-on food.
X — 11.0 0.80
30 ±
1)
5
ECO
2)
50°C
Normally soiled crockery.
Energy-saving programme.
X X 11.0 1.05
165 ±
1)
6
INTENSIVE 70°C
Recommended programme for
heavily soiled crockery, especially
suitable for pots and pans.
X X 14.0 1.55
155 ±
1)
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PDSX 6232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PDSX 6232 in the language / languages: German as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info