491445
4
Zoom out
Zoom in
Previous page
1/6
Next page
GB11
IMPORTANT: the installer is responsible for any damage or injury resulting from
incorrect installation.
To guarantee correct operation, the appliance must be installed on a perfectly flat
surface.
For cut-out dimensions, see the figure below.
Dimensions in mm
For flush mounted installation or setting into a marble worktop, contact
the After-sales Service for the installation kit and necessary instructions.
4812 310 19277 Installation kit for marble worktop;
4801 211 00112 Installation kit for flush fitted worktop.
To guarantee correct operation, the appliance must be installed on a perfectly flat
surface.
The worktop must be 30-60 mm thick.
If necessary, cut the kitchen unit and worktop to fit before installing the hob.
Clean the cutout of any remaining dust that could compromise appliance
operation.
If a column unit is installed adjacent to the hob, leave a distance of at least 100
mm from the edge of the hob.
1. Position the clips (A) in the spaces provided on the hob trim (Fig.3) if not
already positioned.
2. Measure the centre point of the vertical sides of the cut-out (Fig. 1)
3. Fit the brackets (C) in the centre of the vertical sides, aligning the upper
edge of the brackets so that they are flush with the worktop surface (Fig.2).
4. Fix the brackets with the 4 screws supplied (B) using the holes provided.
5. Insert the hob in the cutout, making sure the clips (A) are secured in the
spaces provided (Fig.4).
Fig. 1
Fig.2
Fig.3
Fig.4
Undercounter oven installation
If an oven (which must be of our manufacture) is to be installed under the
hob, ensure it is equipped with a cooling system and observe the distances
given in the figure to the side.
There must be nothing between the cooktop and the oven (cross rails,
panels, brackets, etc.).
INSTALLATION AND FIXING
ASSEMBLY
490
+2
0
580
510
483
553
min. 50
52
+1
0
560
+2
0
R min. 6,5
max. 8
C
B
A
5mm
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PCTOC140060NE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PCTOC140060NE in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Privileg PCTOC140060NE

Privileg PCTOC140060NE User Manual - German - 2 pages

Privileg PCTOC140060NE User Manual - Dutch - 6 pages

Privileg PCTOC140060NE User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info