8074

Princess pdm Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
PRINCESS TRAVELLING IRON “STEAM & SPRAY IRON” ART 2425
1. Opening for filling (closable)
2. Spray button
3. Handle release button
4. Voltage selection switch
IMPORTANT INSTRUCTIONS
The following precautionary measures should be taken before using the iron.
• FIRST OF ALL CHECK WHETHER THE VOLTAGE SELECTION SWITCH IS SET
CORRECTLY. You can choose between the ranges 110-120 V or 220-240 V. Switch to the desired
setting using the point of a pen or similar object. Please note: If the iron is set incorrectly, it may
break down or fail to reach the required temperature.
• The handle can be lifted upwards or folded in as desired by pressing the release button.
• Leave the iron to heat up for a minimum of 3 minutes to allow the temperature to stabilize, as
during the first minutes the temperature can shoot up to a higher temperature than intended.
Additional important instructions:
1. Read the instructions for use fully.
2. Only use the iron for ironing purposes.
3. Never immerse the appliance in water or any other liquid.
4. Only unplug the appliance when the thermostat is in the “MIN” position. Never pull on the
cord but take hold of the plug itself when pulling it out of the socket.
5. Make sure the cord does not come into contact with the hot iron. Let the iron cool down before
putting it away.
6. Make sure the appliance is unplugged when filling it with water or when it is not being used.
7. Do not use the iron if it has fallen, if it is damaged or if the cord is damaged.
8. Take care when ironing in the vicinity of children. Do not leave the iron unattended.
9. Prevent burns by avoiding contact with the iron, steam or hot water.
10. Do not use the iron out of doors.
11. Do not use the iron in the vicinity of explosive or inflammable substances.
12. Take the appliance to be repaired in the case of a defect. Do not attempt to replace a damaged
cord yourself but call in a recognized repairman, as special tools are needed for this.
FILLING WITH WATER - FIRST UNPLUG THE APPLIANCE.
Fill the iron with water by opening the cap on the top. Close the cap after filling. Use soft water. If
the quality of the water in a foreign country is questionable, use bottled water (still water!). For
steam ironing, set the thermostat to “max”. Empty the iron again after steam ironing to prevent
leakage (unplug the appliance before emptying).
IRONING TIPS
Iron the fabric requiring the lowest temperature setting first. Inspect the label to find the
composition of the material and set the thermostat to suit the most sensitive material.
Synthetic materials can melt if the ironing temperature is too high. For materials that tends
to go shiny, place a cloth between the iron and the material.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess pdm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess pdm in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info