- Do not use carbonated water or other
liquids to fill the water reservoir.
- Make sure that the water does not splash
over the edge of the appliance.
Fill the water reservoir (2) with the required •
amount of water.
Switching on and off (fig. A)
To switch on the appliance, turn the •
function dial (1) to position ’1‘, ’2‘ or ’3‘.
To switch off the appliance, turn the •
function dial (1) to position ’0‘.
Setting the function (fig. A)
Turn the function dial (1) to the required •
position to set the function.
Setting Function
0 Off
1 Vibration
2 Bubbling & Warming
3 Vibration, Bubbling & Warming
Hints for use
Before you proceed, we need you to pay
attention to the following notes:
- Before placing your feet into the appliance,
always check the temperature of the water.
- Make sure that the water does not splash
over the edge of the appliance.
- Do not stand in the appliance.
Fill the water reservoir (2) with the required •
amount of water.
Insert the mains plug into the wall socket.•
Sit down on a chair and place your feet in •
the appliance.
Turn the function dial (1) to position •
’1‘, ’2‘ or ’3‘.
Move your feet forward and backward •
over the reflex zones (4) to enjoy the deep-
penetrating massage. The reflex zones are
designed according to the shape of your
feet and eliminate your fatigue.
Massage your feet on the massage roller (5) •
to further stimulate the blood circulation.
Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 565781 Princess foot spa has been
designed for soothing tired and painful feet in
order to relax the entire body. The appliance
can be used to massage your feet and provide
massaging heat. The appliance also helps to
warm your feet and stimulate the blood
circulation. The appliance is suitable for indoor
use only. The appliance is suitable for domestic
use only.
1. Function dial
2. Water reservoir
3. Anti-splash cover
4. Reflex zone
5. Massage roller
6. Drain spout
7. Support foot
Initial use
Clean the appliance. Refer to the section •
”Cleaning and maintenance”.
Use
Filling the water reservoir (fig. B)
Before you proceed, we need you to pay
attention to the following notes:
- Before filling the water reservoir, remove
the mains plug from the wall socket.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without water
in the water reservoir.
- Do not exceed the maximum mark when
you fill the water reservoir (fig. B).
- Only use warm water to fill the water
reservoir. Do not use the appliance to heat
cold water.
