753528
7
Zoom out
Zoom in
Previous page
1/88
Next page
Instruction manual
7
Remote control buttons
Cool mode: In cooling mode, the LED lamp is blue. Press this
button to activate the cooling mode. Note: The default start mode
is the cooling mode.
Heat mode: The display number in heat mode is orange. Press
this button to activate the heat mode.
Oscillation button: Press the Oscillation button to turn on the
oscillation function. The fan will swing from left to right. Press this
button again to stop oscillating.
Power button: The device can be switched on and off by pressing
the power button.
Increase/Decrease volume of air: Press the "+" button on the left
side of the remote control to increase the volume of air, press the
"-" button on the left side of the remote control to decrease the
airflow. It can be set in 1-10 fan speed in cooling mode, heat
mode can be set for 4 levels.
Natural mode: The device show the current fan speed on screen,
the fan simulates the natural breeze, it works in both cooling and
heating mode.
Timer: Press the timer button to select the desired range between
1 hour to 24 hours.
Sleep mode: Sleep mode works in both heating and cooling. The
fan speed will reduce to speed 1 from whichever fan speed you
set. The display will show the current fan speed where it reduced
to.
Increase/Decrease temperature: In heat mode, press the
temperature button on the right side of the remote control to set
the temperature between 16°C and 30°C. Note: this button does
not work in cool mode.
Mute: This will turn off the sounds of the device.
Heating mode instructions
Press the heat mode button and the display shows the ambient
temperature.
Press temperature button to set the temperature, the display will
flash digitally, which can be set to 16 to 30 degrees.
Set temperature should be higher than the ambient temperature,
so that the heating function will be turned on.
When the ambient temperature reaches the target temperature,
the heating element will stop for a while and machine will be
fanning to vent heat, after a few seconds the fan will stop too until
the ambient temperature is below target temperature.
If the ambient temperature is lower than the set temperature the
heating function will activate automatically.
Note: The default setting temperature is 20 °C. In the heat mode,
when the ambient temperature is below 0 °C, the display only
shows 01, it does not display negative temperature value. When
the heat mode runs over 9 hours, the machine will automatically
stop. Restart by pressing the host power button or by using the
button on the remote control.
EN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 347000 Smart Heating Cooling Toren at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 347000 Smart Heating Cooling Toren in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info