Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
Description (fig. A)
Your 334000 Princess garment steamer has
been designed for steaming garments and
fabrics to remove creases. The appliance is
suitable for indoor use only. The appliance is
suitable for domestic use only.
1. On/off switch
2. On/off indicator
3. Steam hose
4. Steam head
5. Hose connection
6. Telescopic pole
7. Clamps (telescopic pole)
8. Pole connection
9. Water reservoir
10. Handle (water reservoir)
11. Water filling point / Water drain point
12. Wheels
13. Steam head holder
14. Clothes hanger
15. Fabric brush
Initial use
Clean the appliance. Refer to the section •
"Cleaning and maintenance".
Clean the accessories. Refer to the section •
"Cleaning and maintenance".
Assembly (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
- Make sure that the telescopic pole is fully
extended to provide a free flow of steam.
Place the water reservoir (9) into the •
appliance.
Insert the telescopic pole (6) into the pole •
connection (8). Lock the telescopic pole (8)
by turning it clockwise.
Release the clamps (7). Set the telescopic •
pole (6) to the maximum height. Lock the
clamps (7).
Mount the steam hose (3) onto the hose •
connection (5) until it clicks into place.
Remove the steam hose (3) from the hose
connection (5) by pulling the locking collar
(16) upwards.
Mount the steam head holder (13) to the •
telescopic pole (6). Hang the steam head
(4) onto the steam head holder (13).
Use
Filling the water reservoir (fig. C)
Before you proceed, we need you to pay
attention to the following notes:
- Before filling the water reservoir, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without water in
the water reservoir.
- Do not exceed the maximum mark when
you fill the water reservoir.
- It is recommended to fill the water
reservoir with a mixture of 50% tap water
and 50% distilled water in order to prevent
the formation of excessive limescale.
- Only use cold water to fill the water
reservoir.
- Do not use carbonated water or other
liquids to fill the water reservoir.
Remove the water reservoir (9) from the •
appliance.
Remove the cap (17).•
Fill the water reservoir (9) through the •
water filling point (11) with the required
amount of water.
Mount the cap (17).•
Place the water reservoir (9) into the •
appliance.
