EN
Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 332927 Princess vacuum cleaner has
been designed for vacuuming dry substances.
The appliance is not suitable for vacuuming
wet substances. The appliance is suitable for
indoor use only. The appliance is suitable for
domestic use only.
1. On/off button
2. Mains cable rewind button
3. Speed control button
4. Full indicator
5. Handgrip
6. Dustbag compartment
7. Release button (dustbag compartment)
8. Hose
9. Tube
10. Extension tube
11. Airflow control switch
12. Suction nozzle
13. Floor surface selector
14. Wheels
15. Parking bracket
16. Crevice nozzle
17. Upholstery nozzle
18. Hose connection
19. Locking knob (extension tube)
20. Accessory storage
21. Locking knob (accessory storage)
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly, always switch off the
appliance and remove the mains plug from
the wall socket.
Mounting and removing the
dustbag (fig. B - D)
The dustbag and the dustbag holder must be
properly mounted in order to close the cover
of the dustbag compartment.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the appliance without the
dustbag.
Mounting the dustbag
Keep the release button (7) pressed and •
open the cover (22).
Remove the dustbag holder (23) from the •
dustbag compartment (6).
Insert the dustbag (24) into the slots (25) •
of the dustbag holder (23) (fig. C1). Slide
the dustbag (24) to the end of the dustbag
holder (23) (fig. C2).
Insert the dustbag holder (23) into the slot •
(26) of the dustbag compartment (6).
Make sure that the dustbag holder (23) is
placed on the holders (27) (fig. D).
Close the cover (22) until the release •
button (7) clicks into place. Make sure that
the hole (25) in the dustbag (24) aligns
with the hose connection (18).
Removing the dustbag
Keep the release button (7) pressed and •
open the cover (22).
Remove the dustbag holder (23) from the •
dustbag compartment (6).
Remove the dustbag (24) from the dustbag •
holder (23).
Insert the dustbag holder (23) into the slot •
(26) of the dustbag compartment (6).
Close the cover (22) until the release •
button (7) clicks into place.
Mounting and removing the hose
(fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
- Before mounting the hose, make sure that
the dustbag compartment is inserted into
the appliance.
To mount the hose (8), insert the hose •
outlet into the hose connection (18) until
the release buttons click into place.
To remove the hose (8), keep the release •
buttons pressed and pull the hose outlet
from the hose connection (18).
