Manual Princess 322411 (page 6 of 35) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

8063

Zoom out

Zoom in

1/35

USING THE IRON

The first time

1. If you are using the iron for the first time, check that the voltage indicated on the underside of the iron

corresponds to the voltage of the circuit to which you intend to connect the iron.

2. Remove any labels and stickers from the iron.

3. Some parts of the iron have been lightly greased; this may cause the iron to give off a little smoke

when it is switched on for the first time. The smoke will stop after a short time. Use ordinary tap water

for steam ironing. However, if you live in a hard water area, we recommend the use of distilled water

for best results.

FILLING THE WATER RESERVOIR

1. Ensure that the appliance is not plugged in.

2. Place the reservoir on a stable surface.

3. Fill the water reservoir (max. 1 litre)

4. You can use tap water. If you live in a hard water area, you can use distilled water instead.

5. Never use vinegar, decalcifying agents or other chemicals.

6. Close the steam reservoir by manually turning the cap clockwise until firmly closed.

FILLING THE WATER RESERVOIR WHEN THE IRON AND/OR WATER RESERVOIR

IS HOT

ATTENTION: when the iron is heating up, the water reservoir is pressurised. Only fill the reservoir when

it is empty and cool.

1. Turn the iron off using the 'iron switch'.

2. Turn the water reservoir off using the 'steam switch'

3. Remove the plug from the socket.

4. Carefully unscrew the cap of the water reservoir (turn 1 to 1

times anticlockwise) until steam can be

heard escaping. Wait until the noise stops. This sound is quite normal and does not mean that anything

is wrong with the appliance.

5. Continue to unscrew the cap carefully until the sound is heard again. Wait once more until the noise

stops. Continue in this fashion until the cap is removed.

6. Wait for a few minutes, then slowly pour warm water into the aperture.

DRY IRONING

To iron without steam, the steam reservoir switch must be in the OFF position.

STEAM IRONING

1. As indicated on the thermostat, steam ironing is only possible at higher ironing temperatures, so set the

thermostat to •• or •••

2. Insert the plug into the electricity socket

3. Set the “steam on/off” switch to “on”. The indicator light will come on.

4. The iron heats up faster than the water tank. If you wish, you can switch the iron on a couple of minutes

later.

5. Select the right temperature using the thermostat.

6. Set the “iron on/off” switch to “on”. The indicator light in the switch and the iron heating indicator

light will come on.

7. After a few minutes, the iron heating indicator light will go out. This means that the iron plate has

reached the right temperature.

8. When the indicator light on the switch goes out it means that the water reservoir has heated up and that

there is enough steam. You can now start to steam iron.

SWITCHING ON THE STEAM

1. Ensure that there is water in the reservoir and that the thermostat is set to “steam”.

2. Press the uppermost button to turn on the steam.

3. IMPORTANT: you may have to press the bottom button (steam jet) a few times to remove

all the air from the system before the pump will start.

4. Pressing the button on top will cause the iron to emit steam. You can turn the steam off

by briefly pressing the bottom button halfway in.

5. Pressing the bottom button all the way in produces a jet of steam.

6. The iron can be used to steam iron horizontally or vertically (e.g. to clean curtains and

clothing).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Princess 322411 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Princess 322411 Manual

Product: