5970
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
CLEANING
FIRST UNPLUG THE CORD FROM THE SOCKET
Rinse the pot and the filter holder. These parts are not dishwasher-safe. Use a damp cloth to wipe off the
outside of the machine.
DESCALING
Regular descaling will help prolong the life of the coffeemaker. It is a good idea to descale around once
a month. If the local water supply is especially hard, twice a month is recommended. Hard water is more
than 20° DH (a German scale used to measure water hardness). Your water company can tell you the
degree of hardness. You should immediately descale when the appliance:
Makes gurgling noises;
Takes longer than usual to brew;
Still has water in the reservoir after brewing.
Nearly all commercially available descaling products are appropriate for use. Check the package to see
whether the product is suitable for coffeemakers. Never use any product containing hydrochloric or
sulphuric acid. These are not suitable for descaling.
To do so, proceed as follows:
First allow the appliance to cool down sufficiently.
Fill the reservoir with cold water.
Add the amount of descaling agent indicated on the package.
Place a filter paper in the permanent filter, not forgetting to put the pot in place.
Switch on the appliance.
Once about 2 cups have flowed through, switch off the appliance and let it stand for a
half-hour to allow the descaling agent to work.
Switch on the appliance again. After all of the water with descaling agent has flowed through,
brew clean water through it three times to rinse away any remaining traces of descaling agent.
Note: Let the appliance cool down for about three minutes in between rinse cycles. The warranty does
not apply to appliances with calcified build-up.
USING THE KETTLE
The kettle should be used exclusively for boiling water; never use it with other liquids or ingredients.
First boil a full pot of water to clean the pot and discard this water.
Always fill the pot between the minimum and maximum level markers. If insufficient water is used,
the kettle may switch off, with too much water it may boil over. Always remove the pot when filling it
to avoid water dripping into the base.
Switch it on by using the on/off button under the handle. The indicator lamp will be illuminated.
Once the water has boiled, the on/off switch returns automatically to the off position.
If desired, the water can be boiled again by pressing the button once more. Always wait
for 30 seconds after it has switched off automatically.
If the appliance is accidentally switched on when empty, the boil-dry protection will auto-
matically switch it off. Adding water will then cool the boil-dry protection mechanism
enabling you to use the kettle as normal.
Note:
Do not remove the pot from its base until it has switched off automatically.
Do not fill the pot higher than the MAX level indicator or boiling water may spray out.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 252133 Classic Combi Tower at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 252133 Classic Combi Tower in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info