111704
10
Zoom out
Zoom in
Previous page
1/71
Next page
7
Classic Paddy Master Article 242110
Brewing coffee
Always use soft coffee pods (60 mm).
Hard coffee pods, often used in
espresso machines, are not suitable
for this appliance.
Never use damaged coffee pods or
ground coffee. These can block the
distribution disc and the pod holder.
The number of coffee pods and the type of
pod holder you use depend on the amount
of coffee you wish to brew:
for one cup: use one pod and the 1-cup
pod holder.
for two cups or a mug: use two pods and
the 2-cup pod holder.
1 Press the On/Off button to switch on the
appliance. The indicator light will blink
slowly while the water is heating up.
The appliance is ready to brew coffee
once the indicator light is illuminated
continuously.
2 Unlock the lid by turning the lid handle
clockwise to position .
3 Open the lid.
4 Put the coffee pod holder in the
appliance.
5 Put the coffee pod(s) in the centre of
the pod holder. The pod(s) must be
inserted with the flat side facing upward
and the curved side facing downward.
6 Close the lid.
7 Lock the lid by turning the lid handle
anticlockwise to position .
8 Put the cup(s) or the mug underneath
the spout.
Make sure that the lid is closed
properly and locked before you start
brewing coffee. If the lid is not closed
properly, the indicator light will start
blinking rapidly when you activate the
appliance by pushing one of the
buttons for one or two cups.
Do not remove the water reservoir
during the brewing cycle.
9 Press the button for the amount of
coffee you wish to brew:
- the ‘one cup’ button for one 125 ml
cup.
- the ‘two cups’ button for a mug or
two 125 ml cups.
The appliance will now start brewing your
coffee and automatically supplies the
optimum quantity of water. The brewing
cycle can be interrupted by pressing the
On/Off button. If you switch the appliance
back on then it will NOT complete the
brewing cycle.
10 Remove and discard the coffee pod(s)
after the brewing cycle. Coffee pods
should only be used once.
11 Switch off the appliance after use
(press the On/Off button) and remove
the plug from the wall socket. If the
appliance is not switched off then it will
automatically switch off after 1 hour.
Maintenance
and cleaning
Never move the appliance when it is
switched on or is still hot. Switch off
the appliance, and wait until it has
cooled down before you move it.
Never immerse the appliance in water,
or in other liquids. For your safety, do
not use the appliance again if it falls
into water; dispose of the appliance.
Never use corrosive or scouring
cleaning agents.
1 Make sure that the appliance is
switched off (the indicator light is
extinguished).
2 Remove the plug from the wall socket
and allow the appliance to cool down
completely.
Princess_Classic_Paddy_Master_242110.book Page 7 Thursday, November 1, 2007 2:19 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 242110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 242110 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info