491651
16
Zoom out
Zoom in
Previous page
1/105
Next page
11
Article 212700 Princess Food Processor and Blender
7 Press the P(ulse) button to have the
drive unit run for a short period at high
speed (pulse function) or press the I
button for continuous low speed or the
II/ICE button for continuous high speed.
The stand-by indicator light will dim and
the blue indicator light in applied button
will be lit.
Note: the blender works very fast. In a
few seconds the product will be
chopped. The smoothness of the blend
increases with longer blending times.
8 If necessary, top up the contents by
opening the lid insert: turn the lid insert
anti-clockwise and remove it from the
lid. If the pieces are too large for the
filling opening then switch off the
blender, remove the lid, and add the
product. Put the lid back on the jug
before switching the blender on again.
9 Once you have processed the required
quantity of fruit and/or vegetables, you
can switch the appliance off (press the
button with the lit indicator light).
10 Unscrew the jug and remove it from the
drive unit.
Grinding ice
The appliance is equipped with a special
procedure to grind ice cubes in the
blender jug. Press the II/ICE button for
more than 3 seconds to start up this
procedure.The appliance will start
running for 1,5 seconds and stop 0,7-0,8
seconds. This is repeated 10 times,
taking about 22 seconds.
Safety during use
To avoid personal injury or damage to
the appliance, never insert a hand or
another object into the jug whilst the
appliance is being used.
Never allow the power cord to hang
over the edge of the draining board,
worktop or table.
Always make sure the power cord has
been fully unwound.
Never use the appliance outdoors.
Never use the appliance in a humid
room.
Always remove the plug from the wall
socket after use.
Make sure your hands are dry when
you touch the appliance, the power
cord or the plug.
Switch off the appliance and remove
the plug from the wall socket in the
event of a malfunction during use,
before cleaning the appliance, before
fitting or removing an accessory and
before storing the appliance after use.
Never leave the appliance unattended
when in use.
Always close the lid before switching
on the appliance.
Hot liquids in the blender may result in
the lid flying off due to the steam and
pressure caused by the hot liquid.
Prevent this from happening by
holding the lid down with a cloth
whilst the blender is in use.
The blender works very quickly. The
ingredients are ground within just a
few seconds. The longer the blender
is switched on, the finer the products
will be ground.
Maintenance
and Cleaning
1 Remove the plug from the plug socket.
2 Remove the knife from the accessory
shaft after pressing the two locks above
the knife and shift the knife up.
3 Clean the mixing bowl, the lid, the
blending jug with lid and all the
accessories, except the drive unit, with
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 212700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 212700 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info