To switch on the appliance with continuous
high speed, set the on/off switch (1) to the ’II’
position.
To switch on the appliance in pulse mode,
set the on/off switch (1) to the ’P’ position.
To switch off the appliance, set the on/off
switch (1) to the ’O’ position.
Hints for optimum use
Cut the fruit and/or vegetables into pieces.
Make sure that the pieces of fruit and/or
vegetables fit in the jar.
Remove the jar lid from the jar.
Put the pieces of fruit and/or vegetables
into the jar.
Mount the jar lid onto the jar.
Mount the jar lid insert into the jar lid.
Insert the mains plug into the wall socket.
Switch on the appliance by setting the
on/off switch to the required position. The
appliance chops the pieces of fruit and/or
vegetables in a few seconds. The longer
the appliance is switched on, the finer the
pieces of fruit and/or vegetables will be
chopped.
If necessary, add more pieces of fruit
and/or vegetables:
- Turn the jar lid insert counterclockwise
to remove the jar lid insert from the jar lid.
- If the pieces are too large for the filling
opening of the jar lid, switch off the
appliance, remove the jar lid, and add
the pieces of fruit and/or vegetables.
- Mount the jar lid onto the jar.
- Mount the jar lid insert into the jar lid.
Switch on the appliance by setting the
on/off switch to the required position. The
appliance chops the pieces of fruit and/or
vegetables in a few seconds. The longer
the appliance is switched on, the finer the
pieces of fruit and/or vegetables will be
chopped.
After use, switch off the appliance and
remove the mains plug from the wall socket.
Warning!
- The appliance has been designed for mixing
cold and lukewarm ingredients (max. 55 °C).
It is recommended not to use the appliance
for mixing hot liquids and solids to prevent
the jar lid from abruptly coming off the
appliance due to steam pressure. Keep the
jar lid pressed with your hand when mixing
lukewarm liquids to prevent leakage.
1. On/off switch
2. Jar
3. Jar lid
4. Jar lid insert
5. Blade
Initial use
Preparation
Clean the appliance.
Refer to ”Cleaning and maintenance”.
Assembly
Warning!
- Before assembly, always remove the
mains plug from the wall socket.
Mounting the jar (fig. B)
Mount the jar (2) onto the appliance. Make
sure that the slots in the base of the jar align
with the lugs on the housing. Lock the jar (2)
by turning it clockwise until the arrow on the
jar aligns with the dot on the housing.
Mount the jar lid (3) onto the jar (2).
Mount the jar lid insert (4) into the jar lid (3).
Lock the jar lid insert (4) by turning it
clockwise 90°.
Switching on and off (fig. C)
Warning!
- Do not switch on the appliance when the
jar is empty (fig. D).
- Do not leave the appliance switched on
continuously for more than three minutes.
To switch on the appliance with continuous
low speed, set the on/off switch (1) to the ’I’
position.
