Manual Princess 201951 (page 6 of 28) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

55658

Zoom out

Zoom in

1/28

TIPS FOR USE

Plug the Princess Juicer into the socket and turn it on with the switch at the back.

Type 1950

The motor will be activated but the juicing cone will remain still because of the automatic clutch. The

juicing cone will only rotate when pressure is applied.

Type 1951

The juicing cone will only turn once the lid is closed or when the lid of the juicer is removed.

Fig. 2 Drip control mechanism open

Pressing, Type 1950 and 1951:

Cut the citrus fruit into two equal halves. Place one half onto the middle of the juicing cone and press

lightly. Put a glass under the spout (first open the drip stop for type 1951). Now close the lid. The juicing

cone will rotate. Exert even pressure until juice stops coming out of the fruit.

Tip: Juicing is easier when the fruit is placed on the press point of the lid. Make sure that the fruit is tilted

slightly forward (see fig 3).

Do not press too hard. If you hear the motor rotating more slowly or if it stops, you are pressing too hard.

The motor will not become damaged because the thermal protective device turns the motor off if it is

overstrained. If this occurs, we advise you to turn the juicer off with the on/off switch. After a few

minutes, the motor will cool down and the Princess Juicer can be used again. Always switch the juicer off

after use.

In some cases, it is easier to press half on the juicing cone with your hand instead of the lid. This method

is recommended when the fruit, such as small oranges, lemons and large grapefruits, do not fit onto the

juicing cone. This method is also recommended for hard (refrigerated) fruit.

For type 1950, it is easy to press the fruit half onto the cone with your hand. For the type 1951, the lid

must first be removed. To remove the lid, press the lid release (see fig. 4) on the back of the closed lid

and then pull the lid up. The motor will now turn continuously.

Fig. 4 To replace the lid, follow

the above steps in reverse

order.

CLEANING

FIRST UNPLUG THE CORD FROM THE SOCKET

Clean the juicer after each use to prevent leftover food from sticking. The pressure cone,

the reservoir and the drip tray can be easily removed by pulling them up. Do not wash

these in the dishwasher. Each component can be washed in hot soapy water, with the

exception of the motor base. Do not use abrasive or strong detergents. Wipe the motor base

with a damp cloth.

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Princess 201951 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Princess 201951 Manual

Product: