- 144002: Do not use the bread clamps when
bread has already been inserted into the
bread slots.
Place the appliance on a stable and flat •
surface.
Insert the crumb tray (8) into the slot (11).•
Insert the mains plug into the wall socket.•
Take one of the following actions:•
- 144000/144001/144002: Insert the
bread into the bread slots (2).
- 144001: Place the bun warming rack (9)
onto the bread slots (2). Place the buns
onto the bun warming rack (9).
- 144002: Insert the bread into the bread
clamps (10). Insert the bread clamps (10)
into the bread slots (2).
Move the browning control button (3) to •
the required browning setting ("1-7").
The browning setting can be read from the
browning control indicator (4).
Note: Experiment with the required browning
setting to achieve the best results.
Lower the bread carriage lever (1) until it •
clicks into place to switch on the appliance.
The appliance starts toasting the bread.
The on/off indicator (7) comes on.
To toast frozen bread, press the defrost •
button (5). The defrost indicator (5) comes
on.
To reheat toasted bread, press the reheat •
button (6). The reheat indicator (6) comes
on.
Note: If the bread becomes jammed, remove
the mains plug from the wall socket and wait
until the appliance has cooled down. Hold the
appliance upside down and carefully remove
the jammed bread from the appliance.
To interrupt the process, press the cancel •
button (7). The on/off indicator (7) goes
off.
If the process is completed, the appliance •
will switch off automatically and raise the
toasted bread from the bread slots.
The on/off indicator (7) goes off.
Take one of the following actions:•
- 144000/144001/144002: Remove the
bread from the bread slots (2).
- 144001: Remove the buns from the bun
warming rack (9).
Remove the bun warming rack (9) from
the bread slots (2).
- 144002: Remove the bread clamps (10)
from the bread slots (2). Remove the
bread from the bread clamps (10).
After use, remove the mains plug from the •
wall socket and wait until the appliance
has cooled down.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
- Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Clean the inside of the appliance after each •
use:
- Remove the crumb tray from the
appliance.
- Hold the appliance upside down and
shake the appliance to remove crumbs.
- Clean the crumb tray in soapy water.
Rinse the crumb tray under running
water. Thoroughly dry the crumb tray
with a clean, dry cloth.
- Insert the crumb tray into the appliance.
Clean the accessories:•
- 144001: Clean the bun warming rack in
soapy water. Rinse the bun warming
rack under running water. Thoroughly
dry the bun warming rack with a clean,
dry cloth.
- 144002: Clean the bread clamps in soapy
water. Rinse the bread clamps under
running water. Thoroughly dry the
bread clamps with a clean, dry cloth.
