The oil/liquid fat pump starts spraying the
water and the heating element starts
heating the water.
If the process is completed after 2 minutes,
the appliance will beep. The oil/liquid fat
pump and the heating element will switch
off automatically.
Remove the mains plug from the wall
socket and wait until the appliance has
cooled down.
Clean the basket in soapy water.
Clean the removable pan in soapy water.
Clean the appliance, the electronic control
unit and the lid with a soft, damp cloth and
a few drops of washing-up liquid.
Thoroughly dry the appliance and the
accessories.
Assemble the appliance.
Store the appliance in a dry and frost-free
place, out of the reach of children.
Refreshing oil or liquid fat
The oil or the liquid fat must be refreshed after
every 4 uses.
Remove the lid, the basket and the
electronic control unit from the appliance.
Remove the removable pan from of the
appliance.
Put the oil or the liquid fat in a container.
Dispose of the oil or the liquid fat.
Clean the removable pan in soapy water.
Thoroughly dry the removable pan.
Assemble the appliance.
Fill the removable pan with fresh oil or
liquid fat just before using the appliance
again.
Disclaimer
Subject to change; specifications can be
changed without further notice.
As the lid stays on the appliance during the
deep-frying process, no heat is lost and the
automatic heat-up time is short.
Defrost the food before use for the
healthiest results.
Do not deep-fry pre-cooked French fries
more than once. Always pre-fry fresh
French fries.
Do not fill the basket with too much food to
avoid undesired frying results.
Regularly refresh the oil or the liquid fat for
the healthiest results. Always change the
oil or the liquid fat after deep-frying raw
snacks like chicken legs.
Keep the oil or the liquid fat fresh for
a longer period by sieving it after use to
remove food residues.
Cleaning and maintenance
Warning!
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Caution!
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible
damage.
Cleaning the appliance
Put the oil or the liquid fat in a container.
Dispose of the oil or the liquid fat or save
the oil or the liquid fat for future use.
Mount the oil/liquid fat pump to the
electronic control unit.
Fill the removable pan with 1 litre of clean
water.
Place the lid onto the appliance.
Insert the mains plug into the wall socket.
Simultaneously press the ’+’ button and the
’-’ button to start the self-cleaning function
of the oil/liquid fat pump. The appliance
beeps shortly.
